EN 57

Power Switch

VIDEO/MEMORY Switch (Open the LCD monitor to access this switch.)

To USB

USB cable (provided)

To USB connector

USB-equipped PC

Display

PC

We b CAMERA

 

Using The Camcorder As A WebCam

This camcorder can be used as a WebCam via USB connection.

1 Make sure all necessary software (provided) are installed in your PC and all units are turned off.

2 Connect the camcorder to your PC using the USB cable.

3 Set the VIDEO/MEMORY Switch to “MEMORY” and set the Power Switch to “ ” or “ ”, then turn on the PC.

•“Web CAMERA” appears on the screen.

•If the PC is not powered on, the camcorder does not enter the Web Camera mode.

4 When finished, turn off the PC first, then the camcorder. Disconnect the USB cable from the camcorder and PC.

NOTES:

●In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core filter. If a cable has only one core filter, the end that is closest to the filter should be connected to the camcorder.

●It is recommended to use the AC Power Adapter/

Charger as the power supply instead of the battery pack ( pg. 9).

●Use the provided software PIXELA ImageMixer to capture video in real-time.

●You can also use the camcorder for webconference by using Windows® Microsoft Netmeeting and signing up for Microsoft Hotmail.

●In the Web Camera mode, the following buttons cannot be operated: TITLE, E-MAIL, SNAPSHOT, the Recording Start/Stop button.

Refer to the instruction manuals of the PC and provided Software.