EN 43
IMPORTANT
•Be sure to always use the same tape and memory card together as they were during recording; otherwise, the camcorder cannot recognize Tape and Memory Card IDs to perform NAVIGATION function properly.
•Check if an appropriate tape and memory card are loaded when the following messages appear: “NO
ID ON TAPE OR CARD”, “UNABLE TO USE NAVIGATION”, “THIS MEMORY CARD IS NOT COMPATIBLE”.
•If you change the memory card while shooting on one tape, two memory cards will share the tape’s thumbnail images. We recommend that you use one memory card for one tape.
•NAVIGATION Search does not work if the current position is at a blank portion on the tape. Also, do not leave a blank portion partway through the tape when shooting; otherwise, NAVIGATION function does not work properly.
•Before shooting newly over a recorded tape, be sure to delete all thumbnail images of the previous recording from the relevant memory card.
•If you copy thumbnail images from one memory card to another via a PC, NAVIGATION Search does not work with the copied memory card.
TO ADD THUMBNAIL IMAGES DURING TAPE
PLAYBACK
1 Perform step 1 of “TO FIND SCENES ON TAPE USING THUMBNAIL IMAGES (NAVIGATION SEARCH)”.
2 Press the MENU wheel in. The Menu Screen appears. Rotate the MENU wheel to select “ 
VIDEO” and press it.
3 Rotate the MENU wheel to select “ 
COPY” and press it. The Sub Menu appears. Select “NAVIGATION” by rotating the MENU wheel and press it.
4 Rotate the MENU wheel to select “
RETURN” and press it twice. The Menu Screen closes.
5
6 Press SNAPSHOT at the desired point.
•“
” appears and the image of the point where SNAPSHOT is pressed is stored on the memory card as a thumbnail image.
TO DELETE THUMBNAIL IMAGES
Display
SOUND MODE – STEREO
| 12B I T MODE | – | SOUND 1 | |||||
| SYNCHRO | – |
| O . O | ||||
|
| |||||||
| REC MODE | – | SP | |||||
| BLANK SRCH | – | OFF | |||||
|
|
|
| COPY | ||||
|
|
|
|
|
|
|
|
|
| NAV I . DEL . |
|
|
| ||||
| S / AV I NPUT | – | OFF | |||||
| RETURN |
|
|
|
| |||
NAV I GAT I ON
DELETE CURRENT?
2 6 . 5 . 0 2 1 3 : 0 0
EXECUTE
RETURN
Menu
Screen
NAVIGATION
Screen
When “IMAGE SEL.” is selected.
1 Load a memory card ( pg. 13). Set the VIDEO/ MEMORY Switch to “VIDEO”, then set the Power Switch to “
” while pressing down the Lock Button.
2 Press the MENU wheel in. The Menu Screen
appears. Rotate the MENU wheel to select “ 
VIDEO” and press it. Rotate the MENU wheel to select “NAVI.DEL.” and press it. The Sub Menu appears.
3 By rotating the MENU wheel . . .
..... select “IMAGE SEL.” to delete the currently
displayed thumbnail image.
..... select “TAPE SEL.” to delete all thumbnail images
for the tape which contains the currently displayed image.
..... select “ALL.” to delete all thumbnail images
stored on the memory card at once.
Then, press the MENU wheel in. The NAVIGATION screen appears.
4 Rotate the MENU wheel to select “EXECUTE”, then press it.
•To cancel deletion, select “RETURN”. Press 3to display the next image, or 2to display the previous image.
•Thumbnail images cannot be deleted during tape playback.
NOTE:
Once images are deleted, they cannot be restored. Check images before deleting.