EN 61
Power Switch
SNAPSHOT
Button
Lock Button
COPY – OF F
IMAGE NAVIGATION
Play/Pause Button (4/6)
MENU Wheel
VIDEO/MEMORY Switch (Open the LCD monitor to access this switch.)
Display
SP 6
Dubbing Still Images Recorded On A Tape To A Memory Card
Still images can be dubbed from a tape to a memory card.
1 Load a memory card ( pg. 13) and cassette ( pg. 12).
2 Set the VIDEO/MEMORY Switch to “VIDEO”, then set the Power Switch to “
” while pressing down the Lock Button.
3 Press the MENU wheel in. The Menu Screen appears. Rotate it to select “ 
VIDEO” and press it. The VIDEO Menu appears.
4 Rotate the MENU wheel to select “ 
COPY” and press it. The Sub Menu appears. Rotate it to select “IMAGE” and press it. Selection is complete.
5 Rotate the MENU wheel to select “
RETURN” and press it twice. The normal playback screen reappears.
6 To select a video image to be dubbed, start playback by pressing 4/6. At the moment you find the image you wish to dub, press it again to engage Still Playback.
7 To start dubbing, press SNAPSHOT. The selected image is stored on the memory card.
• “ ” blinks during dubbing.
NOTES:
●If SNAPSHOT is pressed in step 7 when a memory card is not loaded, the message “COPYING FAILED” is displayed.
●If an image recorded on the tape using the WIDE mode ( pg. 30) is dubbed to a memory card, the WIDE mode identifying signal is not dubbed with it.
●To use Playback Special Effects with a video image you
wish to dub, perform up to step 7 using the remote control (provided) ( pg. 65).
●Images are dubbed in 640 x 480 pixels.