Make sure the camcorder and PC are turned off.

56 EN

CONNECTIONS Advanced Connections

Power Switch

VIDEO/MEMORY Switch (Open the LCD monitor to access this switch.)

To DV

To

IN/OUT

USB

Core filter

DV cable

USB cable

(optional)

(provided)

Core filter

OR

To DV

To USB

connector

connector

PC with DV connector

USB-equipped PC

Connection To A Personal Computer

This camcorder can transfer still images to a PC via DV or USB connection as shown in the illustration.

1

2 Connect the camcorder to your PC using the appropriate cable as shown in the illustration.

3 If you are using the USB connection, set the VIDEO/MEMORY switch to “MEMORY”.

4 Turn the camcorder’s Power Switch to “ ” while pressing down the Lock Button located on the switch and turn on the PC.

•Refer to the instruction manual of the software on how to transfer a still image to the PC.

•If the PC connected to the camcorder via the USB cable is not powered on, the camcorder does not enter the USB mode.

5 When finished, turn off the PC first, then the camcorder.

NOTES:

●In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core filter. If a cable has only one core filter, the end that is closest to the filter should be connected to the camcorder.

●It is recommended to use the AC Power Adapter/

Charger as the power supply instead of the battery pack ( pg. 9).

●Never connect the USB cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder.

●The date/time information cannot be captured into the PC.

●Refer to the instruction manuals of the PC and provided Software.

●The still images can also be transferred to a PC with a DV connector-equipped capture board.

●When using a DV cable, be sure to use the optional JVC VC-VDV206U or VC-VDV204U DV cable depending on the type of DV connector (4 or 6 pins) on the PC, or use the DV cable provided with the capture board.

●The system may not work properly depending on the PC or capture board you are using.

“ACCESSING FILES” appears on the LCD monitor while the PC is accessing data in the camcorder or the camcorder is transferring a file to the PC. Never disconnect the USB cable while “ACCESSING FILES” is displayed on the LCD monitor since this can result in product damage.