EN 49

Power Switch

VIDEO/MEMORY Switch

Lock Button (Open the LCD monitor to access this switch.)

MENU Wheel

SELECT Button

Display

Menu

PROTECTMENUScreen

DELETE

DPOF

PR I NT

NO . RESET

FORMAT

D I SPLAY

END

MENU

PROTECT CURRENT

PROT . AL L

CANC . AL L

RETURN

PROTECTPROTECT

Screen

PROTECTED

RETURN

Protecting Files

The Protect mode helps prevent the accidental erasure of files.

1 Load a memory card ( pg. 13).

2 Set the VIDEO/MEMORY Switch to “MEMORY”, then set the Power Switch to “ ” while pressing down the Lock Button located on the switch.

• A stored file is displayed.

If you want to select another type of file

. . . go to step 3.

If not . . . go to step 4.

3 Press SELECT. The MEMORY SELECT Screen appears. Rotate the MENU wheel to select the type of file: IMAGE, E-MAIL CLIP ( pg. 46), SOUND

( pg. 45) or TITLE ( pg. 48). Then press the MENU wheel in. The selected type of file is displayed.

4 Press the MENU wheel in. The Menu Screen appears. Rotate the MENU wheel to select “PRO- TECT”, then press it.

5 Rotate the MENU wheel to select the desired mode.

CURRENT : Protects the currently displayed file.

PROT.ALL : Protects all files stored on the memory card.

6 Press the MENU wheel in. The PROTECT Screen appears.

•If you selected “CURRENT” in step 5, press 2or 3to select the desired file.

7 Rotate the MENU wheel to select “EXECUTE” and press it.

• To cancel protection, select “RETURN”.

NOTES:

●If the “ ” mark appears, the currently displayed file is protected.

●When the memory is initialised or corrupted, even protected files are deleted. If you do not want to lose important files, transfer them to a PC and save them.

TO REMOVE PROTECTION

Before doing the following, perform steps 1 through 4 above.

5 Rotate the MENU wheel to select the desired mode. CURRENT : Removes protection from the currently

displayed file.

CANC.ALL : Removes protection from all files stored on the memory card.

6 Press the MENU wheel in. The PROTECT Screen appears.

•If you selected “CURRENT”, press 2or 3to select the desired file.

7 Rotate the MENU wheel to select “EXECUTE” and press it.

• To cancel selection, select “RETURN”.