Press 4/6to start tape playback.

EN 47

Power Switch

Lock Button

Recording Start/Stop Button

Stop Button (5)

Play/Pause Button (4/6)

 

 

 

 

 

 

 

 

 

 

E-MAIL Button

VIDEO/MEMORY Switch (Open the LCD monitor to access this switch.)

TO MAKE VIDEO CLIPS FROM RECORDED

VIDEO FOOTAGE

1 Load a memory card ( pg. 13) and cassette ( pg. 12). Set the VIDEO/MEMORY Switch to “VIDEO”, then set the Power Switch to “ ” while pressing down the Lock Button located on the switch.

2 Select the image size ( pg. 46, steps 2 through 4 of “TO MAKE VIDEO CLIPS FROM REAL-TIME CAMERA IMAGE”).

3

4 Press E-MAIL. “E-MAIL CLIP STANDBY” appears and the camcorder enters the E-Mail Clip Record-Standby mode.

5 Press the Recording Start/Stop Button to start E- Mail Clip Recording.

6 Press the Recording Start/Stop Button to stop E- Mail Clip Recording. “COMPLETED” is displayed, then the camcorder re-enters the E-Mail Clip Record- Standby mode.

7 Press E-MAILto end E-Mail Clip Recording. The normal screen reappears.

To cancel E-Mail Clip Recording . . .

..... after step 4, press E-MAILagain or press 5to

stop tape playback.

To view video clips stored on a memory card . . .

.....  pg. 26, 27.

NOTES:

●Playback operation cannot be performed during E-Mail Clip Recording.

●If the end of the tape is reached in step 4, the E-Mail Clip Record-Standby mode will be automatically cancelled.

●The video clip files made with this camcorder are MPEG4 compliant, however, some MPEG4 files made with other devices may not be played back with this camcorder.

●You can delete unwanted video clips ( pg. 50,

“Deleting Files”) or protect important ones from accidental erasure ( pg. 49, “Protecting Files”).

●TITLE and TITLE Index screen ( pg. 48) cannot be used during E-Mail Clip recording.

●Video noise may appear while viewing video clips in the LCD monitor or viewfinder, however, this noise is not present in the actual video clips stored on the memory card.

●You can also view video clips on your PC by using Windows® Media Player. Refer to the instructions of the PC and software.