EN 59

Power Switch

To

AV

To

Connector S-VIDEO cover**

S-Video

Audio/Video cable

[mini-plug to

cable

RCA plug]

(provided)

(provided)

 

To AUDIO, VIDEO* and S-VIDEO OUT connectors

VCR (Playback deck)

TV

*Connect when an S-Video cable is not used.

**When connecting the cables, open this cover.

Dubbing From A VCR

[To Use This Camcorder As A Recorder]

1 Make sure all units are turned off, then connect the camcorder and the VCR as shown in the illustration. Also refer to pg. 54 and 55.

2 Set “SOUND MODE” to “12 BIT” or “16 BIT” and “REC MODE” to “SP” or “LP” in the Menu Screen depending on your preference ( pg. 32).

3 Set the camcorder’s Power Switch to “ ” while pressing down the Lock Button located on the switch. Turn on the VCR’s power and insert the appropriate cassettes in the camcorder and the VCR.

4 Set “S/AV INPUT” to “ON” in the Menu Screen to engage the analogue input mode ( pg. 32).

5 Press the Recording Start/Stop Button on the camcorder to engage the Record-Pause mode.

AV. IN ” appears on the screen.

6 Engage the VCR’s Play mode, then engage the Still Playback mode when you have found a spot just before the edit-in point.

7 Press the Recording Start/Stop Button on the

camcorder to engage the Record mode. rotates on the screen. Engage the VCR’s Play mode.

8 To stop dubbing, press the Recording Start/Stop

Button on the camcorder so that stops rotating, then engage the VCR’s Stop mode.

9 Repeat steps 6 through 8 for additional editing.

10Set “S/AV INPUT” back to “OFF” in the Menu Screen to disengage the analogue input mode ( pg. 32).

NOTES:

●It is recommended to use the AC Power Adapter/

Charger as the power supply instead of the battery pack ( pg. 9).

●Analogue signals can be converted to digital signals with this procedure.

●It is also possible to dub from another camcorder.