IMPORTANT PRODUCT SAFETY INSTRUCTIONS

Electrical energy can perform many useful functions. But improper use can result in potential electrical shock or fire hazards. This product has been engineered and manufactured to assure your personal safety. In order not to defeat the built-in safeguards, observe the following basic rules for its installation, use and servicing.

ATTENTION:

Follow and obey all warnings and instructions marked on your product and its operating instruc- tions. For your safety, please read all the safety and operating instructions before you operate this product and keep this manual for future reference.

INSTALLATION

1. Grounding or Polarization

(A)Your product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature.

If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

(B)Your product may be equipped with a 3-wire grounding-type plug, a plug having a third (ground- ing) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature.

If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.

2. Power Sources

Operate your product only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. If your product is intended to operate from battery power, or other sources, refer to the operating instructions.

3. Overloading

Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

4. Power Cord Protection

Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

EN3

5. Ventilation

Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered.

Do not block the openings by placing the product on a bed, sofa, rug or other similar surface.

Do not place the product in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

6. Wall or Ceiling Mounting

The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

ANTENNA INSTALLATION

INSTRUCTIONS

1. Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

2. Lightning

For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

3. Power Lines

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE, ANSI/NFPA 70

 

ANTENNA

 

LEAD IN WIRE

GROUND CLAMP

 

 

ANTENNA

 

DISCHARGE UNIT

 

(NEC SECTION

ELECTRIC SERVICE

810-20)

EQUIPMENT

GROUNDING CONDUCTORS

 

 

(NEC SECTION 810-21)

 

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250. PART H)

NEC – NATIONAL ELECTRICAL CODE

Page 3
Image 3
JVC GR-DVL507 Grounding or Polarization, Power Sources, Overloading, Power Cord Protection, Ventilation, Lightning

GR-DVL507, GR-DVL307 specifications

The JVC GR-DVL307 and GR-DVL507 are both compact and user-friendly mini DV camcorders that have made a significant impact in the world of home video recording. Launched in the early 2000s, these models are celebrated for their ease of use, solid build quality, and a range of features that appeal to both novice and experienced videographers.

The GR-DVL307 is equipped with a 680,000-pixel pixel CCD sensor, which ensures that videos captured are of good quality, with vibrant colors and decent resolution. Its 16x optical zoom and 800x digital zoom capabilities allow users to capture distant subjects with clarity. The camera is designed with a 2.5-inch LCD screen that provides a clear view for composing shots and monitoring recordings. The built-in LED light is particularly useful for low-light situations, giving users the flexibility to shoot in various lighting conditions.

In terms of connectivity, the GR-DVL307 offers USB and FireWire ports, enabling seamless transfer of video to a computer for editing and sharing. The camera also supports various record modes, including long play and standard play, allowing users to optimize recording time based on their needs. The inclusion of digital image stabilization reduces the chances of shaky footage, enhancing the quality of the final product.

On the other hand, the GR-DVL507 builds upon the features of the 307 with some advanced capabilities. It features a larger, 1.33-megapixel CCD sensor that significantly improves image quality, ensuring sharper images and more detailed video. The GR-DVL507 also includes a more advanced optical zoom of 20x, providing greater versatility for capturing dynamic scenes. This model features a 3.5-inch LCD monitor, which enhances the viewing experience and simplifies frame composition.

Both models incorporate JVC's innovative Video Stabilization technology which further reduces unwanted motion blur. The GR-DVL507 additionally provides options for manual control over focus and exposure, appealing to more experienced users who want greater creative control over their recordings.

In summary, JVC's GR-DVL307 and GR-DVL507 camcorders represent excellent choices for those looking to capture video memories without compromising on quality or ease of use. With their combination of user-oriented features, solid technology, and portability, these camcorders continue to be valued by those who appreciate the art of home video making.