JVC GR-DVM96 Video Menu, Playback sound, Synchro adjustment, Dubbing from tape to memory card

PLAYBACK MENUS				EN 51
	Video Menu
		VIDEO	(	: Factory-preset)

Playback sound

During tape playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back. Select the type of sound to accompany your playback picture. According to the menu access explanation on page 38, select “SOUND MODE” or “12BIT MODE” from the Menu Screen and set it to the desired parameter.

NOTES:

●The “SOUND MODE” setting is available for both 12-bit and 16-bit sound. (In previous models’ functions, “12-bit” is called “32 kHz” and “16-bit” is called “48 kHz”.)

●The camcorder cannot detect the sound mode in which the recording was made during fast-forward or rewind. During playback the sound mode is displayed in the upper left corner.

SOUND	STEREO	Sound is output on both “L” and “R” channels in stereo.
MODE
	SOUND L	Sound from the “L” channel is output in stereo.
	SOUND R	Sound from the “R” channel is output in stereo.
12BIT MODE	MIX	Original and dubbed sounds are combined and output in stereo on
		both “L” and “R” channels in stereo.
	SOUND 1	Original sound is output on both “L” and “R” channels in stereo.
	SOUND 2	Dubbed sound is output on both “L” and “R” channels in stereo.

Synchro adjustment

SYNCHRO

±0.0

Refer to “For More Accurate Editing” ( pg. 77).

Recording mode

REC MODE	SP	Allows you to set the video recording mode (SP or LP) depending on
	LP	your preference. It is recommended you use “REC MODE” in VIDEO
		Menu when using this camcorder as a recorder during digital dubbing.
		( pg. 64)
		NOTE:
		“REC MODE” can be set when the Power Switch is set to “P” or
		“M”.

Blank search

BLANK SRCH CANCEL

EXECUTE

Helps find a blank portion of tape when you want to record from the middle of a tape. ( pg. 23)

Dubbing from tape to memory card

COPY

OFF

ON

Enables snapshots to be taken during video playback.

Enables dubbing of images recorded on a tape to a memory card. ( pg. 65)