JVC GR-DVM96 instruction manual 84 EN, Advanced features, Press Backlight

84 EN			TROUBLESHOOTING (cont.)
Advanced features
	SYMPTOM		POSSIBLE CAUSES		CORRECTIVE ACTION
14.	The focus does not adjust	14.	•Focus is set to the Manual	14.	•Set Focus to the Auto mode.
	automatically.		mode.		( pg. 55)
			•The recording was done in a		•Clean the lens and check the
			dark place, or the contrast		focus again. ( pg. 91)
			was low.
			•The lens is dirty or covered
			with condensation.
15.	Snapshot mode cannot be	15.	•The Squeeze mode	15.	•Disengage the Squeeze
	used.		(SQUEEZE) is selected.		(SQUEEZE) mode.
					( pg. 46)
16.	The colour of Snapshot looks	16.	•The light source or the	16.	•Find a white subject and
	strange.		subject does not include		compose your shot so that it
			white. Or there are various		also appears in the frame.
			different light sources behind		( pg. 27, 53)
			the subject.		•Disengage the Sepia (SEPIA)
			•The Sepia (SEPIA) or		and Monotone
			Monotone (MONOTONE)		(MONOTONE). ( pg. 42)
			mode is activated.
17.	The image taken using	17.	•Shooting was performed	17.	•Press BACKLIGHT.
	Snapshot is too dark.		under backlit conditions.		( pg. 57)
18.	The image taken using	18.	•The subject is too bright.	18.	•Set “r PROGRAM AE” to
	Snapshot is too bright.				“SPOTLIGHT”. ( pg. 42)
19.	White Balance cannot be	19.	•The Sepia (SEPIA) or	19.	•Disengage the Sepia (SEPIA)
	activated.		Monotone (MONOTONE)		or Monotone (MONOTONE)
			mode is activated.		mode before setting White
					Balance. ( pg. 42, 43)
20.	Wipe/Fader effects do not	20.	•The Power Switch is set to	20.	•Set the Power Switch to “M”.
	work.		“A”.		( pg. 14)
21.	The Black & White Fader does	21.	•The Sepia (SEPIA) or	21.	•Disengage the Sepia (SEPIA)
	not work.		Monotone (MONOTONE)		and Monotone
			mode is activated.		(MONOTONE). ( pg. 42)
22.	Program AE with special	22.	•The Power Switch is set to	22.	•Set the Power Switch to “M”.
	effects does not work.		“A”.		( pg. 14)
23.	Even when Slow Shutter is not	23.	•When shooting in the dark,	23.	•If you want the lighting to
	selected, the image looks like		the unit becomes highly		look more natural, set “GAIN
	it is activated.		sensitive to light and the		UP” to “ACG” or “OFF”.
			image takes on an effect		( pg. 38, 45)
			similar to Slow Shutter.