JVC GR-DVM96 instruction manual 62 EN, Dubbing To a VCR

62 EN DUBBING

Dubbing To A VCR

.

To AV

To S-VIDEO

Connector

Covers**

1	Following the illustrations, connect the
	camcorder and the VCR. Also refer to pages 24
2	and 25.
	Set the camcorder’s VIDEO/MEMORY Switch to
3	“VIDEO”.
	Set the camcorder’s Power Switch to “P”
	while pressing down the Lock Button located on
4	the switch.
	Turn on the VCR’s power.
5 Insert the source cassette in the camcorder.
6	Insert the recording cassette in the VCR.
7	Engage the VCR’s AUX and Record-Pause modes.
8	● Refer to the instruction manual for the VCR.
	Press 4/9 on the camcorder to start playback of
9	the source tape.
	At the point you want to start dubbing, engage
	the VCR’s Record mode.

Audio/Video cable (provided)

To AUDIO,

VIDEO* IN

TVVCR

S-Video cable (optional)

To S-VIDEO IN

10	To pause dubbing, engage the VCR’s Record-
Pause mode and press 4/9 on the camcorder.
11	Repeat steps 8 – 10 for additional editing. Stop
the VCR and camcorder.

NOTES:

● It is recommended to use the AC Adapter as the

power supply instead of the battery pack.

( pg. 11)

● As the camcorder starts to play your footage it will

appear on your TV. This will confirm the

connections and the AUX channel for dubbing

purposes.

● Before you start dubbing, make sure that the

*Connect when an S-Video cable is not used.

**When connecting the cables, open these covers.

indications do not appear on the connected TV. If

they do, they are being recorded onto the new

tape.

To choose whether or not the following displays

appear on the connected TV...

• Date/time

Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.

( pg. 38, 49) Or, press DISPLAY on the remote

control to turn on/off the date indication.

• Time code

Set “TIME CODE” to “OFF” or “ON”.

( pg. 38, 49)

• Playback sound mode, tape speed and tape

running displays

Set “ON SCREEN” to “LCD” or “LCD/TV”.

( pg. 38, 49)

● The S-Video cable is optional. Be sure to use the

YTU94146A S-Video cable. Consult the JVC

Service Center described on the sheet included in

the package for details on its availability. Make

sure to connect the end with a core filter to the

camcorder. The core filter reduces interference.