JVC GR-DVM96 Viewfinder indications blink, 200X.
pg, VIDEO/MEMORY Set the VIDEO/MEMORY

						EN 83
	6.	During recording, sound	6.	•The optional headphones are	6.	•Connect the optional
		cannot be heard.		not connected to the		headphones to the
				headphones connector.		headphone connector
				(GR-DVM96 only)		(GR-DVM96 only).
				•The sound volume of the		( pg. 95)
				headphones connector		•Adjust the sound volume
				(GR-DVM96 only) was not		during playback. ( pg. 22)
				adjusted appropriately. The
				sound volume at this point is
				the same as the level it was
				adjusted to during playback.
	7.	The LCD monitor or	7.	•Certain Wipe/Fader effects,	7.	•Re-read the sections covering
		viewfinder indications blink.		certain modes of Program AE		Wipe/Fader effects, Program
				with special effects, “DIS”		AE with special effects and
				and other functions that		“DIS”. ( pg. 38, 40 –
				cannot be used together are		43, 46)
				selected at the same time.
	8.	Digital Zoom does not work.	8.	•10X optical zoom is selected.	8.	•Set “ZOOM” to “40X” or
				•The VIDEO/MEMORY		“200X”. ( pg. 44)
				Switch is set to “MEMORY”.		•Set the VIDEO/MEMORY
						Switch to “VIDEO”.
Video and D.S.C. Playback
		SYMPTOM		POSSIBLE CAUSES		CORRECTIVE ACTION
	9.	Play, Rewind and Fast-Forward	9.	•The Power Switch is set to	9.	•Set the Power Switch to
		functions do not work.		“A” or “M”.		“P”. ( pg. 22)
				• VIDEO/MEMORY Switch is		•Set the VIDEO/MEMORY
				set to “MEMORY”.		Switch to “VIDEO”.
	10.	The LCD monitor image is	10.	•During playback of the	10.
		distorted.		unrecorded portion, High-
				speed Search and still		—
				playback, LCD monitor
				indications appear distorted.
				This is not a defect.
	11.	The tape is moving, but there is	11.	•Your TV has AV input	11.	•Set the TV to the mode or
		no picture.		terminals, but is not set to its		channel appropriate for
				VIDEO mode.		video playback.
				•The cassette holder cover is		( pg. 24, 25)
				open.		•Close the cassette holder
						cover. ( pg. 16)
	12.	Blocks of noise appear during	12.		12.	•Clean the video heads with
		playback, or there is no		—		an optional cleaning
		playback picture and the				cassette. ( pg. 91)
		screen becomes blue.
	13.	A memory card cannot be	13.	•The Power Switch is set to	13.	•Set the Power Switch to
		played back.		“A” or “M”.		“P”. ( pg. 28)
				•The VIDEO/MEMORY		•Set the VIDEO/MEMORY
				Switch is set to “VIDEO”.		Switch to “MEMORY”.

CONTINUED ON NEXT PAGE