30 EN | D.S.C. PLAYBACK (cont.) |
To Print By Selecting Still Images And Number Of Prints
1Perform steps 1 – 8 in “To Print All Still Images (One Print For Each)” ( pg. 29).
2Press + or – to select
“CURRENT”, and press | DPOF |
| |
SET/SELECT. The DPOF |
|
screen appears. | SHEETS |
3 Turn the SHUTTLE | 0 0 |
RETURN | |
SEARCH Ring to the left |
|
(3) or to the right (5) |
|
to select the desired file. |
|
Initialising A Memory Card
You can initialise a memory card anytime. After initialising, all files and data stored in the memory card, including those which have been protected, are cleared.
1Set the VIDEO/MEMORY Switch to “MEMORY”.
2Set the Power Switch to “P” while pressing down the Lock Button located on the switch.
3Open the LCD monitor fully, or pull out the viewfinder fully.
4Press MENU. The Menu
4 Press + or – to select the number indication (00), |
Screen appears.
MENU
and press SET/SELECT. |
5 Select the number of prints |
by pressing + to increase the number, or – to decrease the number, and press SET/SELECT.
●Repeat steps 3 through 5 for the desired number of prints.
●The number of prints can be set up to 15.
●To correct the number of prints, select the image again and change the number.
PROTECT
DELETE
DPOF
NO . RESET
FORMAT
D I SPLAY
END
5 Press + or – to select “FORMAT”, and press SET/SELECT. The FORMAT screen appears.
6 Press + or – to select “EXECUTE”, and press SET/SELECT. The memory card is initialised.
6Press + or – to select
“RETURN”, and press SET/ SELECT. The “SAVE?”
DPOF
● When initialisation is finished, “NO IMAGES |
STORED”, “NO |
“NO SOUND STORED” appears. |
● To cancel initialisation, select “RETURN”. |
appears.SAVE?
● If you did not change |
| |
EXECUTE | ||
CANCEL | ||
any settings in step 3 | ||
| ||
through 5, the Menu |
| |
Screen reappears. |
|
7Press + or – to select “EXECUTE” to save the setting you have just made, and press SET/
SELECT.
● To cancel selection, select “CANCEL”.
To Reset The Number Of Prints
1Perform steps 1 – 8 in “To Print All Still Images (One Print For Each)” ( pg. 29).
2Press + or – to select “RESET”, and press SET/ SELECT. The DPOF screen appears.
3Press + or – to select “EXECUTE”, and press SET/ SELECT. The normal playback screen appears.
●To cancel selection, select “RETURN”.
●The number of prints is reset to 0 for all still images.
CAUTION:
While performing the above, never disconnect power, as this may cause the memory card to be corrupted.
CAUTION:
Do not perform any other operation (such as turning off the camcorder) during initialisation. Also, be sure to use the provided AC Power Adapter/Charger, as the memory card may be corrupted if the battery becomes exhausted during initialisation. If the memory card becomes corrupted initialise it.
