JVC GR-DVP10 manual To Remove Protection, To protect the currently displayed file, Card

			EN 27
Protecting Files		To protect the currently displayed file
		9 Press + or – to select
The Protect mode helps prevent the accidental		“CURRENT”, and press	MENU
		SET/SELECT. The	PROTECT CURRENT
erasure of files.			PROT . ALL
		PROTECT screen appears.	CANC . ALL
VIDEO/MEMORY Switch			RETURN
		10 Turn the SHUTTLE
		SEARCH Ring to the left
	Power Switch	(3) or to the right (5)
		to select the desired file.
		11 Press + or – to select	PROTECT
		“EXECUTE”, and press
		SET/SELECT.
		● To cancel protection,	PROTECTED
		select “RETURN”.	RETURN
		● Repeat steps 10 and 11
	Lock Button
		for all files you want to
		protect.
SHUTTLE SEARCH Ring (3/5)		To protect all files stored in the memory
MENU Button		card
		9 Press + or – to select “PROT.ALL”, and press SET/
SET/SELECT Button	+, – Button
		SELECT. The PROTECT screen appears.
		10 Press + or – to select “EXECUTE”, and press
		SET/SELECT.
		● To cancel protection, select “RETURN”.
		NOTES:
		● If the “ ” mark appears, the currently displayed
		file is protected.
1 Load a memory card. ( pg. 16)		● When the memory card is initialised or corrupted,
		even protected files are deleted. If you do not want
2 Set the VIDEO/MEMORY Switch to “MEMORY”.
		to lose important files, transfer them to a PC and
3 Set the Power Switch to “P” while pressing		save them.
down the Lock Button located on the switch.

RECORDING & PLAYBACK

4Open the LCD monitor fully, or pull out the viewfinder fully.

●The type of file (IMAGE, E-MAIL CLIP or SOUND) which has been played back at the last time is displayed.

If you want to select another type of file, go to step 5.

If not, go to step 7.

5Press SET/SELECT. The MEMORY SELECT screen appears.

6Press + or – to select the desired type of file, and press SET/SELECT.

To Remove Protection

Before doing the following, perform steps 1 – 8 in “Protecting Files” in the left column.

To remove protection from the currently displayed file

9Press + or – to select “CURRENT”, and press SET/ SELECT. The PROTECT screen appears.

10Turn the SHUTTLE SEARCH Ring to the left

(3) or to the right (5) to select the desired file.

11 Press + or – to select “EXECUTE”, and press

DIGITAL STILL CAMERA (D.S.C.)

7Press MENU. The Menu Screen

8Press + or – to select “PROTECT”, and press SET/SELECT. The Sub Menu appears.

appears.

MENU

PROTECT

DELETE

DPOF

NO . RESET

FORMAT

D I SPLAY

END

SET/SELECT.

● To cancel selection, select “RETURN”.

● Repeat steps 10 and 11 for all files you want to

remove protection.

CONTINUED ON NEXT PAGE