42 EN

FEATURES FOR RECORDING (cont.)

If Program AE with special effects ( pg. 33) is engaged, certain modes of Program AE with special effects are disabled during Snapshot recording. In such a case, the icon blinks.

If SNAPSHOT is pressed when “DIS” is set to

“ON” ( pg. 36), the Stabiliser will be disabled.

During playback as well, all snapshot modes except Nega mode are available when

COPY” is set to “OFF” in VIDEO Menu. ( pg. 40) However, the shutter sound is not heard.

During Snapshot recording, the image displayed in the viewfinder may be partially missing. However, there is no effect in the recorded image.

When the S/AV/Editing cable is connected to the S/AV connector, the shutter sound is not heard from the speaker, however it is recorded onto the tape.

Motor Drive Mode

Keeping SNAPSHOT pressed in step 5 provides an effect similar to serial photography. (Interval between still images: approx. 1 second)

The Motor Drive mode is disabled when “REC

SELECT” is set to “

/

”. ( pg. 39)

Self-Timer

Once the camcorder is set, the camcorder operator can become part of the scene in a more natural way, adding the final touch to a memorable picture.

1Set the Power Switch to “M” while pressing down the Lock Button located on the switch.

2Open the LCD monitor fully, or pull out the viewfinder fully.

You can tilt the LCD monitor upward to 180° so that it faces forward and view yourself while self-recording with the viewfinder pushed back.

5To stop Self-Timer recording, press the Recording Start/Stop Button again.

The camcorder re-enters Record-Standby mode.

OR

5Press SNAPSHOT.

After 15 seconds, the beep sounds and snapshot recording starts. After that, the camcorder re-enters Record-Standby mode.

6To end Self-Timer recording, select “OFF” in step 3.

NOTE:

If “BEEP” and “TALLY” are set to “OFF” ( pg. 37), the beep does not sound and the tally lamp does not light.

When the Recording Start/Stop Button or SNAPSHOT is pressed, the tally lamp changes as shown:

Begins blinking (Self-Timer starts)

Blinks quickly (Self-Timer shooting starts soon)

Stops blinking and stays on After approx.

3Set “SELF-TIMER” to

“ON ”. ( pg. 31, 36)

4To engage the Self-Timer for video recording, press the Recording Start/Stop Button.

After 15 seconds, the beep sounds and video recording starts.

MANUAL

SEL F – T I MER – OF F ON

RETURN

(Self-Timer video recording starts)

OR

Turns off (Self-Timer snapshot recording occurs)

15 sec.

Self-Timer indication

Page 42
Image 42
JVC GR-DVP10 42 EN, Motor Drive Mode, To end Self-Timer recording, select OFF in step, Set SELF-TIMER to On .  pg