18 EN

MENU Wheel MODE Dial

RECORDING Basic Recording For Video (cont.)

Snapshot (For Video Recording)

This feature lets you record still images that look like

POWER Switch photographs onto a tape.

Lock Button

Operation Switch

SNAPSHOT Button

Display

 

 

 

CAMERA MENU

 

 

Menu Screen

 

 

 

 

 

 

 

1RE TURN

 

 

 

 

 

REC MODE

 

 

 

 

 

 

SOUND MODE

 

 

 

 

 

 

ZOOM

 

 

 

 

 

 

SNAP MODE

FUL L

 

 

 

 

GA I N UP

P I N – UP

 

 

 

 

BEEP / TAL LY

 

 

 

 

 

 

I D NUMBER

 

 

 

 

 

 

DEMO. MODE

 

 

 

 

 

 

 

 

 

 

 

 

FULL Snapshot mode with no frame*

SNAPSHOT MODE SELECTION

Set the POWER Switch to “

” while pressing

1 down the Lock Button located on the switch and the

MODE Dial to “VIDEO” or “

”, then set the

Operation Switch to “ ”. Pull out the viewfinder fully or open the LCD monitor fully.

2 Press the MENU wheel. The Menu Screen appears.

3 Rotate the MENU wheel to select “ ”. Press it and “CAMERA MENU” appears.

4 Rotate the MENU wheel to select “SNAP MODE”, then press it.

5 Rotate the MENU wheel to select the desired Snapshot mode, then press it.

Rotate the MENU wheel to select “1RETURN” and press it twice. The Menu Screen closes.

SNAPSHOT RECORDING

1 Press SNAPSHOT.

If you press during Record-Standby . . .

.... “PHOTO” appears and a still image will be

recorded for approx. 6 seconds, then the camcorder re-enters the Record-Standby mode.

If you press during Recording . . .

.... “PHOTO” appears and a still image will be

recorded for approx. 6 seconds, then the normal recording resumes.

•To use the flash,  pg. 30.

PIN-UP

Pin-Up mode

*There is the sound effect of a shutter closing.

When the MODE Dial is set to “ ”, snapshot recording will be performed with higher quality ( pg. 22).

Motor Drive Mode

Keeping SNAPSHOT pressed provides an effect similar to serial photography. (Interval between still images: approx. 1 second)

NOTES:

To remove the shutter sound,  “BEEP/TALLY” on pg. 27.

If Snapshot recording is not possible, “PHOTO” blinks when SNAPSHOT is pressed.

If Programme AE with special effects ( pg. 36) is engaged, certain modes of Programme AE with special effects are disabled during Snapshot recording. In such a case, the icon blinks.

If SNAPSHOT is pressed when “DIS” is set to “ON” (  pg. 28), the Stabiliser will be disabled.

To dub images recorded on a tape to a MultiMediaCard,  pg. 65.

To reduce the Red-Eye effect in the subject’s eyes when the flash fires,  pg. 30.

During playback as well, all snapshot modes are available

when “ COPY” is set to “OFF” in the Menu Screen (  pg. 41).

When a headphone set is connected to the headphone connector, the shutter sound is not heard from the speaker, however it is recorded onto the tape.

Page 18
Image 18
JVC GR-DVX10 specifications 18 EN, Snapshot For Video Recording, Snapshot Mode Selection, Snapshot Recording