JVC GR-DVX10 specifications EN55, To Print By Selecting Still Images And No. Of Prints

Rotate the MENU wheel to move the green frame to the image you wish to print and press it.

Perform steps 1 through 4 on pg. 54.

POWER Switch

Lock Button

MENU Wheel
		Display
E X I T		D P O F		VGA	DPOF Screen
100-DVC00021
0 1 9	0 0	0 2 0	0 0	0 2 1
0 2 2	0 0	0 2 3	0 0	0 2 4	0 0

EN55

TO PRINT BY SELECTING STILL IMAGES AND NO. OF PRINTS

1

2 Rotate the MENU wheel to selsect “SELECT” and press it. Selection is complete. The DPOF Screen appears.

3

4 Select the number of prints by rotating the MENU wheel towards “+” to increase the number, or towards “–” to decrease the number and press it. Repeat steps 3 and 4 for the desired number of prints.

•The number of prints can be set up to 15.

•To correct the number of prints, select the image again and change the number.

5 Rotate the MENU wheel upward to select “EXIT” and press it. Selection is complete. The Confirmation Screen appears.

6 Rotate the MENU wheel to select “EXECUTE” and press it. The normal playback screen appears.

•To cancel selection, rotate the MENU wheel to select “CANCEL” and press it.

To Reset The No. Of Prints . . .

MEMORY MENU

CANCE L

EXECUT E

Confirmation Screen

.... select “RESET” in step 5 on pg. 54. The number of

prints is reset to 0 for all still images.

CAUTION:

While performing the above, never disconnect power, as this may cause the memory to be corrupted. For safety, all buttons including the POWER Switch are disabled in step 5.

NOTES:

●If you load a MultiMediaCard already set as shown above in a printer compatible with DPOF, it will make prints of the selected still images automatically.

●To print images recorded on a tape, first dub them to a MultiMediaCard (
pg. 65).