JVC GR-DVX10 specifications Corrective Action, EN83, Symptom, Possible Causes

EN83

SYMPTOM		POSSIBLE CAUSES
35. The LCD monitor or		35. • Certain Fade/Wipe effects,
viewfinder indications blink.		certain modes of Programme
		AE with special effects, “DIS”
		and other functions that
		cannot be used together are
		selected at the same time.
36. Coloured bright spots appear		36. • The LCD monitor and the
all over the LCD monitor or		viewfinder are made with
the viewfinder.		high-precision technology.
		However, black spots or bright
		spots of light (red, green or
		blue) may appear constantly
		on the LCD monitor or the
		viewfinder. These spots are not
		recorded on the tape. This is
		not due to any defect of the
		unit. (Effective dots: more than
	99.99 %)
37. During recording, sound		37. • The optional headphones are
cannot be heard.		not connected to the
		headphones connector.
		• The sound volume of the
		headphones connector was
		not adjusted appropriately. The
		sound volume at this point is
		the same as the level it was
		adjusted to during playback.
38. Play, Rewind and Fast-		38. • The POWER Switch is not set
Forward functions do not		to “	”.
work.

39.A MultiMediaCard cannot 39. • The POWER Switch is set to

be played back.	“	” or “	”.
40. The tape is moving, but	40. • Your TV has AV input
there is no picture.	terminals, but is not set to its
	VIDEO mode.
	• The cassette holder cover is
	open.
41. The LCD monitor image is	41. • During playback of the
distorted.	unrecorded portion, High-
	speed Search and still
	playback, LCD monitor
	indications appear distorted.
	This is not a defect.

42.Images on the LCD monitor 42. • The speaker volume is too great. are jittery.

43.	For GR-DVX10 owners:	43. • Since the analogue input
	There is no playback picture	mode is engaged, the
	on the connected TV.	camcorder is in the Record-
		Standby mode.
44.	Blocks of noise appear	44.
	during playback, or there is	————
	no playback picture and the
	screen becomes blue.

CORRECTIVE ACTION

35.• Re-read the sections covering Fade/Wipe effects,

Programme AE with special effects and “DIS” (
pg. 28, 34 – 36).

36.

————

37.• Connect the optional

headphones to the headphone connector (
pg. 86, 87).

•Adjust the sound volume during playback (
pg. 40).

38.• Set the POWER Switch to

“” (
pg. 40).

39. • Set the POWER Switch to

“	PLAY	” ( pg. 45).
	MEMORY

40. • Set the TV to the mode or channel appropriate for video playback (
pg. 56, 57).

• Close the cassette holder cover (
pg. 10).

41.

————

42.• Turn the speaker volume down (
pg. 40).

43.• Set “AV/S-VIDEO” to “OUT”

in the Menu Screen (
pg. 41).

44.•Clean the video heads with an

optional cleaning cassette (
pg. 94).

CONTINUED ON NEXT PAGE