24 EN RECORDING Advanced Features For Video And D.S.C. (cont.)
POSU | RE |
EX |
T | FOCUS Button (3) |
H | F |
G | O |
I | |
L | C |
K | U |
C | S |
A |
|
B |
|
POWER Switch
Lock Button
Operation Switch
MODE Dial
SNAPSHOT Button
MENU Wheel
Video image
Released position
position
Still image
Dual Shooting
Lets you record images on a tape and store still images in a MultiMediaCard simultaneously. In other words, it is possible to store still images in the MultiMediaCard without interrupting image recording on the tape.
Set the POWER Switch to “ | ” while pressing | ||
1 down the Lock Button located on the switch and the | |||
MODE Dial to “ | DUAL | ” . Pull out the viewfinder fully | |
|
|
| |
or open the LCD monitor fully.
2 While recording to a tape, press SNAPSHOT halfway. A still image is displayed in the lower right corner of the screen where the video image being recorded is displayed.
•At this moment, if you release SNAPSHOT, snapshot recording will be cancelled.
3 Press SNAPSHOT fully. The displayed still image is stored in the MultiMediaCard.
NOTES:
●If SNAPSHOT is pressed in the
●If SNAPSHOT is pressed when “DIS” is set to “ON” ( pg. 28), the Stabiliser will be disabled.
●The Stabiliser is less effective in the DUAL mode than in other modes.
●The flash is disabled during video recording.
●Still images are stored in the MultiMediaCard in VGA mode file size ( pg. 15).
●When the MODE Dial is set to “DUAL”, all Fade/Wipe Effects and some Programme AE with special effects
cannot be used ( pg. 34 – 36).
position
