POWER Switch
EN61
Dubbing From A VCR
![[To use this camcorder as a recorder: Only for GR-DVX10 owners]](/images/new-backgrounds/190940/190940121xi3.webp){kind=small}
Lock Button
|
|
|
|
|
|
|
|
|
|
| To S |
| |||
|
|
|
|
|
| ||||||||||
Red to | Yellow to |
|
|
| |||||||||||
|
|
| |||||||||||||
|
|
| |||||||||||||
AUDIO R |
|
|
|
|
|
|
|
|
| VIDEO* |
|
|
| ||
|
|
| |||||||||||||
|
|
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
White to |
| Core filter |
| ||||||||||||
AUDIO L |
|
|
|
|
|
| |||||||||
Audio/Video cable |
| ||||||||||||||
[RCA plug to RCA |
| cable | |||||||||||||
plug] (optional) |
| (optional) | |||||||||||||
[To use this camcorder as a recorder: Only for GR-DVX10 owners]
1 Make sure all units are turned off, then connect the camcorder and the VCR as shown in the illustration. Also refer to pg. 56 and 57.
2 Set “SOUND MODE” to “12 BIT” or “16 BIT” and “REC MODE” to “SP” or “LP” in the Menu Screen depending on your preference ( pg. 11, 26, 27).
3 Set the camcorder’s POWER Switch to “
” while pressing down the Lock Button located on the switch. Turn on the VCR’s power and insert the appropriate cassettes in the camcorder and the VCR.
4
5
6 Engage the VCR’s Play mode, then engage the Still Playback mode when you have found a spot just before the
7 Press START/STOP on the camcorder to engage the
Record mode. “ AV. IN ” appears on the screen. Engage the VCR’s Play mode.
Cable Adapter (not provided)
To Audio, Video* and
8 To stop dubbing, press START/STOP on the camcorder so that “AV. IN” reappears, then engage the VCR’s Stop mode.
9 Repeat steps 6 through 8 for additional editing.
If your VCR has a SCART connector, use a commercially available output cable adapter.
VCR
TV |
10 Set
NOTES:
●When connecting the cables, make sure to connect the ends with a core filter to the camcorder. The core filter reduces interference.
●To use an output cable adapter (commercially avail- able), refer to its instructions.
●It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery pack ( pg. 7).
●Analogue signals can be converted to digital signals with this procedure.
●It is also possible to dub from another camcorder.
*Connect when an
