10 EN GETTING STARTED

Provided Accessories

How To Attach The Lens Cap

To protect the lens, attach the

 

 

provided lens cap to the

 

camcorder as shown in the

 

illustration.

OR

NOTE:

 

To confirm the lens cap is on

 

correctly make sure the cap is flush

 

to the camcorder.

Place here during shooting.

aAC Adapter AP-V14U or AP-V15U

bBattery Pack BN-V408U-B

cS/AV/Editing Cable

dAudio Extension Cable X 2 (for connection of optional Headphone And External Microphone  pg. 11)

eUSB Cable

fCore Filter [large] (for USB Cable  pg. 11 for attachment)

gCore Filter [small] (for S/AV/Editing Cable, Audio Extension Cable and AC Adapter’s cord  pg. 11 for attachment)

hCD-ROM

iShoulder Strap ( pg. 10 for attachment)

jRemote Control Unit RM-V720U

kLithium Battery CR2025* (for remote control unit)

lMemory Card 8 MB (Already inserted in the camcorder)

mLens Cap ( pg. 10 for attachment)

*A lithium battery is pre-installed in the Remote Control Unit at time of shipment (with insulation sheet). To use the Remote Control Unit, remove the insulation sheet.

NOTES:

●In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core filter. If a cable has only one core filter, the end that is closest to the filter should be connected to the camcorder.

●Make sure to use the provided cables for connections. Do not use any other cables.

How To Attach/Detach The Lens Ring

The provided lens ring helps block out glare when shooting under bright sunlight, the same way professional photographers do.

To attach:

Align the lens ring with the camcorder’s lens while the index on the lens ring is facing upward, and then screw the ring clockwise a.

To detach:

Turn the ring counterclockwise b.

Normally, use the camcorder with the lens ring only when you are not using the optional wide or telephoto conversion lens.

Index

Ring

Threading