
EDITING EN 45
Make ConnectionsAlso refer to page 20.
1 A A JVC VCR equipped with a Remote PAUSE connectorConnect the editing cable to the Remote PAUSE connector.
B A JVC VCR not equipped with a Remote PAUSE connector but equipped with an R.A.EDIT connector Connect the editing cable to the R.A.EDIT connector.
C A VCR other than aboveConnect the editing cable to the remote control’s PAUSE IN connector.
2 Insert a recorded tape into the camcorder.
3 Set the VIDEO/MEMORY Switch to “VIDEO”.
4 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.
5 Turn the VCR power on, insert a recordable tape and engage the AUX mode.
●Refer to the VCR’s instructions.
NOTES:
● Before Random Assemble Editing, make sure the |
indications do not appear on the TV monitor. If they do, they |
will be recorded onto the new tape. |
To choose whether or not the following displays appear |
on the connected TV |
• Date/time |
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. |
( pg. 29, 33) Or, press DISPLAY on the remote control |
to turn on/off the date indication. |
To AV
Open the cover.
S/AV/Editing cable mark (provided)
1 | 2 | 3 | 4 |
Editing extension cable (optional)**
AB To Remote PAUSE or
R.A.EDIT
VCR
C To PAUSE IN
• Time code |
Set “TIME CODE” to “OFF” or “ON”. ( pg. 29, 33) |
• Indications other than date/time and time code |
Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”. |
● When editing on a VCR equipped with a DV input |
connector, an optional DV cable can be connected instead |
of the S/AV/Editing cable. However, it is necessary to |
connect the editing cable of the S/AV/Editing cable to the |
VCR. (For details, see step 1.) |
A Black to
TV
*Connect when your TV/VCR has an
**If necessary, use this cable provided with the remote control kit