JVC GR-DZ7 50 EN, TAPE, INSERT, SNAPSHOT, TAPE END, LENS CAP, MEMORY CARD, A. DUB ERROR, INSERT ERROR, A. DUB ERROR, INSERT ERROR, VIDEO/ MEMORY, SET DATE/TIME

50 EN	TROUBLESHOOTING
50 EN
Warning Indications
Warning Indications			A. DUB ERROR!
			<CANNOT DUB ON A LP RECORDED TAPE>
			<CANNOT DUB ON A LP RECORDED TAPE>
			<CANNOT DUB ON A 16BIT RECORDING>
			<CHECK TAPE’S ERASE PROTECTION TAB>
Displays the battery remaining power.			<CHECK TAPE’S ERASE PROTECTION TAB>

			● Appears if Audio Dubbing is attempted on a tape
Remaining power level			● Appears if Audio Dubbing is attempted on a tape
Remaining power level			recorded in the LP mode. ( pg. 43)
			recorded in the LP mode. ( pg. 43)
High		Exhausted	● Appears if Audio Dubbing is attempted on a tape
As the battery power comes close to nil, the battery			recorded in 16-BIT audio. ( pg. 43)
indicator blinks.			● Appears if A. DUB (D) on the remote control is pressed
When the battery power is exhausted, power turns off			when the erase protection tab is set to “SAVE”.
automatically.			( pg. 43)

INSERT ERROR!

Appears when no tape is loaded. ( pg. 15)

CHECK TAPE’S ERASE PROTECTION TAB

Appears when the erase protection tab is set to “SAVE” while the Power Switch is set to “A” or “M” and the VIDEO/MEMORY Switch is set to “VIDEO”. ( pg. 13)

USE CLEANING CASSETTE

Appears if dirt is detected on the heads during recording. Use an optional cleaning cassette. ( pg. 53)

CONDENSATION, OPERATION PAUSED PLEASE WAIT

Appears if condensation occurs. When this indication is displayed, wait more than 1 hour until condensation disappears.

TAPE!

Appears if a tape is not loaded when the Recording Start/ Stop Button or SNAPSHOT Button is pressed while the Power Switch is set to “A” or “M” and the VIDEO/ MEMORY Switch is set to “VIDEO”.

TAPE END

Appears when the tape ends during recording or playback.

SET DATE/TIME!

●Appears when the date/time is not set. ( pg. 14)

●Appears when the built-in clock (lithium) battery is discharged and the previously set date/time is erased. ( pg. 14)

LENS CAP

Appears for 5 seconds after power is turned on if the lens cap is attached or when it is dark.

A. DUB ERROR!

Appears if Audio Dubbing is attempted on a blank portion of a tape. ( pg. 43)

Appears if Insert Editing is attempted on a blank portion of a tape. ( pg. 43)

INSERT ERROR!

●Appears if Insert Editing is attempted on a blank portion of a tape.

●Appears if Insert Editing is attempted on a tape recorded in the LP mode. ( pg. 43)

●Appears if INSERT (I) on the remote control is pressed when the erase protection tab is set to “SAVE”. ( pg. 43)

MEMORY IS FULL

Appears when the memory card’s memory is full and shooting is not possible.

COPYING FAILED

●Appears if dubbing of copyguarded signals is attempted while this camcorder is being used as a recorder.

●Appears in the following cases when dubbing from a tape to a memory card (as digital stills or video clips):

•when no memory card is loaded.

•when the memory card’s memory is full.

•when the memory card is not formatted.

•when a write-protected SD Memory Card is loaded. ( pg. 26)

MEMORY CARD!

Appears if there is no memory card loaded when you attempt to record on a memory card or access data on a memory card.

PLEASE FORMAT

Appears when there is a problem with a memory card and its memory is corrupt, or it has not been initialized. Initialize the memory card. ( pg. 28)

NO IMAGES STORED

Appears if there are no image files stored in the memory card when you attempt memory card playback.