FEATURES FOR RECORDING EN 37

White Balance Adjustment

The white balance that refers to the correctness of color reproduction under various lighting. If the white balance is correct, all other colors will be accurately reproduced. The white balance is usually adjusted automatically.

However, more advanced camcorder operators control this function manually to achieve a more professional color/tint reproduction.

To change the setting

Set “u” to the desired mode. ( pg. 29)

The selected mode indicator except “AUTO” appears.

[AUTO]: White balance is adjusted automatically.

MWB: Adjust the white balance manually when shooting under various types of lighting. ( “Manual White Balance Adjustment”)

FINE: Outdoors on a sunny day.

CLOUD: Outdoors on a cloudy day.

HALOGEN: A video light or similar type of lighting is used.

[ ] = Factory-preset

To return to automatic white balance

Set “u” to “AUTO”. ( pg. 29)

Or, set the Power Switch to “A”.

Manual White Balance Adjustment

Adjust the white balance manually when shooting under various types of lighting.

1 Set the Power Switch to “M”.

 

2 Select “MWB” in

White paper

u W.BALANCE” menu.

( pg. 29)

 

The indication blinks slowly.

3 Hold a sheet of plain white paper in front of the subject. Adjust zoom or position yourself so that the white paper fills the screen.

4 Press and hold SET until

begins blinking rapidly.

When the setting is completed,

 

resumes normal

blinking.

 

 

5 Press SET twice. The Menu Screen closes and the

Manual White Balance indicator is displayed.

NOTES:

In step 3, it may be difficult to focus on the white paper. In such a case, adjust focus manually. ( pg. 35)

A subject can be shot under various types of lighting conditions indoors (natural, fluorescent, candlelight, etc.). Because the color temperature is different depending on the light source, the subject tint will differ depending on the white balance settings. Use this function for a more natural result.

Once you adjust white balance manually, the setting is retained even if the power is turned off or the battery removed.

Wipe Or Fader Effects

These effects let you make pro-style scene transitions. Use them to spice up the transition from one scene to the next.

Wipe or Fader works when video recording is started or stopped.

1 Set the VIDEO/MEMORY Switch to “VIDEO”.

2 Set the Power Switch to “M”.

3 Set “v” to the desired mode. ( pg. 29)

The WIPE/FADER menu disappears and the effect is reserved.

The selected effect indicator appears.

4 Press the Recording Start/Stop Button to activate the Fade-in/out or Wipe-in/out.

To deactivate the selected effect

Select “OFF” in step 3. The effect indicator disappears.

NOTES:

You can extend the length of a Wipe or Fader by pressing and holding the Recording Start/Stop Button.

Some Wipe/Fader Effects cannot be used with certain modes of Program AE with special effects. ( pg. 38) In this case, the selected indicator blinks or goes out.

WIPE/FADER

OFF: Disables the function. (Factory-preset)

FADER–WHITE: Fade in or out with a white screen. FADER–BLACK: Fade in or out with a black screen.

 

FADER–B.W: Fade in to a color screen from a black

FEATURES

 

and white screen, or fade out from color to black and

 

white.

 

 

WIPE–CORNER: Wipe in on a black screen from the

ADVANCED

upper right to the lower left corner, or wipe out from lower

 

left to upper right, leaving a black screen.

 

 

WIPE–WINDOW: The scene starts in the center of a

 

 

 

black screen and wipes in toward the corners, or comes

 

in from the corners, gradually wiping out to the center.

 

WIPE–SLIDE: Wipe in from right to left, or wipe out from left to right.

WIPE–DOOR: Wipe in as the two halves of a black screen open to the left and right, revealing the scene, or wipe out and the black screen reappears from left and right to cover the scene.

WIPE–SCROLL: The scene wipes in from the bottom to the top of a black screen, or wipes out from top to bottom, leaving a black screen.

WIPE–SHUTTER: Wipe in from the center of a black screen toward the top and bottom, or wipe out from the top and bottom toward the center leaving a black screen.