GETTING STARTED

EN 11

 

 

 

How To Attach The Shoulder Strap

 

How To Attach The Core Filter (for USB Cable and

 

 

Audio Extension Cable)

Follow the illustration.

1 Thread the strap through the eyelet.

 

 

 

Attach the core filters to the cables. The core filter

2 Fold it back and thread it through the strap guide and

 

reduces interference.

the buckle.

 

1 Release the stoppers on both ends of the core filter.

To adjust the length of the strap, loosen and then tighten

the strap in the buckle.

3 Slide the strap guide fully towards the eyelet.

Strap guide

Stopper

2 Run the cable through the core filter, leaving approx.

2

3 cm of cable between the cable plug and the core filter.

 

USB cable and AC Adapter’s cord

 

Wind the cable (cord) once around the outside of the

Buckle

core filter as shown in the illustration.

Core filter (large: USB Cable, small:

 

 

3 cm (1-3/16")AC Adapter’s cord)

 

3

1

Wind once.

Audio Extension cable

Eyelet

Wind the cable twice around the outside of the core filter

 

How To Use The Audio Extension Cable

as shown in the illustration.

 

When using optional headphones or external microphone, connect to the provided Audio extension cable (with a core filter attached), then connect the Audio extension cable to the camcorder. The core filter reduces interference. (See the right column.)

Audio cable (not provided)

Microphone

Headphones

To (headphones)

Core filter

To MIC

Open the cover.

3 cm (1-3/16") Core filter (small)

Wind twice.

Wind the cable so that it is not slack.

S/AV/Editing cable

3 cm (1–3/16")Core filter (small)

3 Close the core filter until it clicks shut.

USB cable and AC Audio Extension

S/AV/Editing

Adapter’s cord

cable

cable

NOTES:

Take care not to damage the cable.

When connecting a cable, attach the end with the core filter to the camcorder.