Dubbing To Or From A VCR | To use this camcorder as a player | |
1 Following the illustrations, connect the camcorder and | ||
| ||
| the VCR’s input connectors. | |
| ||
| 3 At the point you want to start dubbing, start recording | |
| on the VCR. (Refer to the VCR’s instruction manual.) | |
| 4 To stop dubbing, stop recording on the VCR, then stop | |
| playback on the camcorder. | |
| NOTES: |
To S/AV connector
Open the cover.
mark
S/AV/Editing cable (provided)
1
2
3
4
5
TV
●It is recommended to use the AC Adapter as the power supply instead of the battery pack. ( pg. 13)
●To choose whether or not the following displays appear on the connected TV
•Date/time
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.
( pg. 29, 33) Or, press DISPLAY on the remote control to turn on/off the date indication.
•Time code
Set “TIME CODE” to “OFF” or “ON”. ( pg. 29, 33)
•Indications other than date/time and time code Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”. ( pg. 29, 33)
VCR
A Remote plug: Not connected (When not in use, keep the Remote plug in its protective caddy.)
B To
*Connect when your TV/VCR has an
1 Following the illustrations, connect the camcorder and the VCR’s output connectors.
2 Set “REC MODE” to “SP” or “LP”. ( pg. 29)
3 Set the camcorder’s Power Switch to “PLAY”.
4 Set “S/AV INPUT” to “A/V.IN” or “S.IN”*. ( pg. 29, 32)
*Select “S.IN” when using
5 Press the Recording Start/Stop Button to engage the
●The “ A/V.IN ” or “ S.IN ” indication appears on the screen.
6 Start playback on the player.
7 At the point you want to start dubbing, press the Recording Start/Stop Button to start dubbing. The 
indication rotates.
8 Press the Recording Start/Stop Button again to stop dubbing. The 
indication stops rotating.
9 Press 8 to return to the normal playback mode.
NOTES:
●After dubbing, set “S/AV INPUT” back to “OFF”.
●Analog signals can be converted to digital signals with this procedure.
●It is also possible to dub from another camcorder.