20 EN VIDEO PLAYBACK |
| |
Shuttle Search | Connections To A TV Or VCR | |
Allows | ||
| ||
playback. |
| |
1) During playback, press 5 for forward search, or |
| |
3 for reverse search. |
| |
2) To resume normal playback, press 4/9. |
|
●During playback, press and hold 5 or 3. The search
continues as long as you hold the button. Once you release the button, normal playback resumes.
● A slight mosaic effect appears on the display during Shuttle Search. This is not a malfunction.
ATTENTION: | To S/AV connector |
|
| Open the cover. | |
During Shuttle Search, parts of the |
| |
|
| |
picture may not be clearly visible, | S/AV/Editing cable | mark |
particularly on the left side of the | (provided) |
|
screen. |
|
|
Blank Search | 1 2 3 4 5 |
Helps you find where you should start recording in the middle of a tape to avoid time code interruption.
( pg. 19)
1 Load a cassette. ( pg. 15)
2 Set the VIDEO/MEMORY Switch to “VIDEO”.
3 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.
4
5
6 Press r or t to select “BLANK SRCH”, and press SET. The Sub Menu appears.
7 Press r or t to select “EXECUTE”, and press SET.
●The “BLANK SEARCH” indication appears and the camcorder automatically starts reverse or forward search, then stops at the spot which is about 3 seconds of tape before the beginning of the detected blank portion.
●To cancel Blank Search midway, press 8.
NOTES:
●Before starting Blank Search, if the current position is at a blank portion, the camcorder searches in the reverse direction. If the current position is at a recorded portion, the camcorder searches in the forward direction.
●If the beginning or end of the tape is reached during Blank Search, the camcorder stops automatically.
●A blank portion which is shorter than 5 seconds of tape may not be detected.
●The detected blank portion may be located between recorded scenes. Before you start recording, make sure there is no recorded scene after the blank portion.
TV
VCR
A Remote plug: Not connected (When not in use, keep the Remote plug in its protective caddy.)
B Black to
C Yellow to VIDEO IN (Connect when your TV/VCR has only A/V input connectors.)
D Red to AUDIO R IN* E White to AUDIO L IN*
* Not required for watching still images only.
1
2 Connect the camcorder to a TV or VCR as shown in the illustration.
If using a VCR, go to step 3. If not, go to step 4.3 Connect the VCR output to the TV input, referring to your VCR’s instruction manual.
4 Turn on the camcorder, the VCR and the TV.
5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.
6 Start playback on the camcorder. ( pg. 19)
To choose whether or not the following displays appear on the connected TV●Date/Time
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. ( pg. 29, 33) Or, press DISPLAY on the remote control to turn on/off the date indication.
●Time Code
Set “TIME CODE” to “ON” or “OFF”. ( pg. 29, 33)
●Indications other than date/time and time code Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”. ( pg. 29, 33)