Displays
Playback
Dubbing
Other problems
Trouble | Action | |
| • Operate the camera. | |
| ||
The LCD monitor | If the camera is not operated for a certain length of time when | |
using the AC adapter, it will enter sleep mode, and the LCD | ||
appears blank. | ||
monitor will turn off. | ||
| ||
The same scene | • Replace the microSD card. | |
(If there are scratches etc. on the microSD card, the camera will | ||
appears stopped for a | have diffi culty reading the data, and this phenomenon may occur. | |
long time. | The camera will try to play back as much as possible, but if this | |
| condition continues, the camera will not be able to play back the | |
| video and it will automatically stop.) | |
Video movement | • Perform cleanup or formatting. | |
| ||
appears jerky. |
| |
|
| |
| • When recording the white balance was not correctly adjusted | |
The color of images | • When the video was recorded with x.v.Color™ set to [ON], change | |
looks strange. | the setting as desired on TV. | |
• Set [EFFECT] to [OFF]. | ||
| ||
|
| |
Images look unnatural | • Change [VIDEO OUTPUT] in the [BASIC SETTINGS] to match | |
on the TV (long and thin | your TV. | |
etc.) |
| |
When dubbing, the | • Operate the video device manually to start and stop recording. | |
connected video device |
| |
does not start recording |
| |
automatically. |
| |
The camera operates | • Copy all fi les from the media onto your computer, and erase the | |
slowly when switching | fi les from the media. | |
between video mode | (If there are many still images (more than 1,000 fi les) on the | |
and still image mode, | media, it takes time for the camera to process the fi les.) | |
or when switching the |
| |
power on or off. |
| |
| • Check the remaining battery charge. | |
| (When the battery is fully charged, the lamp does not fl ash.) | |
The lamp does not flash | • When recharging in either a hot or cold environment, ensure that | |
during battery charging. | battery is being charged within the permitted temperature range. | |
| (If the battery is being recharged outside the permitted | |
| temperature range, recharging may stop to protect the battery.) | |
|
| |
| • Replace the battery. | |
The remote control | • Set [REMOTE] in the [BASIC SETTINGS] to [ON]. | |
doesn’t work. | • The remote control may not operate outdoors or in places | |
| exposed to strong light. | |
|
|
EN 35
