Power | 1 Set the power switch to OFF while pressing | |
down the lock button located on the switch. | ||
This camera’s | 2 Slide and hold OPEN in the direction of the | |
you choose the most appropriate source of | arrow a, then open the battery/CF card cover. | |
power. Do not use provided power supply units | 3 Insert the battery pack firmly into the battery | |
with other equipment. | pack mount until it locks into space as shown in | |
Charging the Battery Pack | the illustration. | |
4 Close the battery/CF card cover firmly until it | ||
| ||
Power Switch | locks. | |
5 Connect the AC adapter to the camera. | ||
Lock Button | ||
Power/Charge Lamp | 6 Plug the AC adapter into an AC outlet. The | |
| power/charge lamp on the camera blinks to | |
| indicate charging has started. | |
OPEN | 7 When the power/charge lamp goes out, | |
charging is finished. Unplug the AC adapter from | ||
| ||
| the AC outlet. Disconnect the AC adapter from | |
Battery/CF Card | the camera. | |
To detach the battery pack | ||
Cover |
Open the battery/CF card cover, and remove the battery pack while sliding BATTERY in the direction of the arrow b.
Protrusion
Battery Pack
BATTERY
Required charging timeOpen the cover. |
|
To DC connector | mark |
| |
To AC outlet |
|
| AC Adapter |
Battery pack | Charging time |
|
|
Approx. 1 hr. 35 min. | |
|
|