Direct Printing with a PictBridge Printer
If your printer is compatible with PictBridge, still images can be printed easily by connecting the camera with the USB cable directly to the printer. DPOF setting can also be used.
NOTE:
After selecting [DIRECT PRINT] in the menu, connect the USB cable.
To print by selecting a still image
1 Set the power switch to .
2 Press MODE to select .
3 Press MENU. The menu screen appears.
4 Select [DIRECT PRINT] with the multi- controller (r/t), then press 49. A message [PLEASE CONNECT PRINTER] appears.
5 Connect the camera to the printer with the USB cable.
●After a while, the print menu appears.
6 Select [SELECTED PRINT] with the multi- controller (r/t), then press 49.
7 Select the desired file with the
8 Set the number of |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
prints with the multi- |
|
|
|
|
|
|
|
controller (w/e). |
|
| NUMBER OF PRINTS |
| 01 |
| |
|
|
| DATE |
| OFF |
| |
● The number of prints can |
|
|
|
|
|
|
|
|
|
|
|
| |||
be set from 1 to 99. |
|
|
|
|
|
| |
|
|
| CANCEL |
|
|
9 Select [DATE] with the
then select [ON] or [OFF] with the multi- controller (w/e).
●Select [ON] to print the date or [OFF] not to print.
10 Select [PRINT] with the
MANAGING FILES EN 47
To cancel print settingSelect [CANCEL] with the
1 Press 49. The confirmation screen appears.
2 Select [EXECUTE] with the
If the printer is compatible with DPOF, you can use the DPOF setting. ( pg. 46)
1 Set the power switch to .
2 Press MODE to select .
3 Press MENU. The menu screen appears.
4 Select [DIRECT PRINT] with the multi- controller (r/t), then press 49. A message [PLEASE CONNECT PRINTER] appears.
5 Connect the camera to the printer with the USB cable.
●After a while, the print menu appears.
6 Select [DPOF PRINT] with the multi- controller (r/t), then press 49.
7 Select [PRINT] with the
●To confirm the DPOF setting, select [CHECK SETTINGS] with the
NOTE:
If the printer is not recognized, or to print again after direct printing with a PictBridge printer, remove the USB cable, select [DIRECT PRINT] in the menu again, and then reconnect the cable.