54 EN REFERENCES

Images on the LCD monitor appear dark or

 

 

Warning Indications

 

 

 

whitish.

 

 

 

 

 

● In places subject to low temperature, images

 

 

 

 

 

 

 

 

 

 

The following indications appear on the screen.

become dark due to the characteristics of the

LCD monitor. This is not a malfunction.

 

 

(Battery indicator)

 

 

 

HAdjust the brightness and angle of the LCD

 

 

 

 

 

Displays the battery remaining power.

monitor. ( pg. 21, 49)

Remaining power level

 

 

 

● When the LCD monitor's fluorescent light reaches

 

 

 

the end of its service life, images on the LCD

 

 

 

 

 

 

 

 

 

 

monitor become dark.

High

 

Exhausted

HConsult your nearest JVC dealer.

 

● As the battery power comes close to nil, the

Colored bright spots appear all over the LCD

 

battery indicator blinks. When the battery power

monitor.

 

is exhausted, power turns off automatically.

● The LCD monitor is made with high precision

SET DATE/TIME!

 

 

 

technology. However, black spots or bright spots

● Appears when the date/time is not set. ( pg. 17)

of light (red, green or blue) may appear constantly

● Appears when the built-in clock (lithium) battery is

on the LCD monitor. These spots are not

 

discharged and the previously set date/time is

recorded on the picture. This is not due to any

 

 

erased. ( pg. 17)

 

 

 

defect of the unit. (Effective dots: more than

 

 

 

 

LENS CAP

 

 

 

99.99 %)

 

 

 

Appears for 5 seconds after power is turned on

The SD card cannot be removed from the

with the power switch set to

, if the lens cap is

camera.

attached or when it is dark.

 

 

 

HPush in the SD card a few more times. ( pg. 18)

 

 

 

PLEASE INSERT MEMORY CARD

Picture does not appear on the LCD monitor.

Appears when no recording medium is inserted

● The LCD monitor's brightness setting is too dark.

in the selected slot. ( pg. 17, 18)

HAdjust the brightness of the LCD monitor.

THIS CARD IS NOT FORMATTED

( pg. 49)

Appears when an unformatted recording medium is inserted.

MEMORY CARD IS FULL

Appears when the recording medium is full and recording is not possible.

CHECK CARD’S WRITE PROTECTION

SWITCH

Appears when you attempt recording when the write protection tab on the SD card is set to the “LOCK” position. ( pg. 18)

THIS CARD IS NOT FOR RECORDING VIDEO Appears when a recording medium which is not capable of video recording is inserted. Use the guaranteed recording medium to work with this camera. ( pg. 62)