You can change the menu settings to customize your camera. Access the desired menu screen by following the steps below, then change the various settings.
[ ] =
BASIC SETTINGINFO | MENU |
|
r 49
MODE
Lock Button
Power Switch | w t e |
1 Select the operation mode.
For Recording Menus:Set the power switch to 
.
Set the power switch to 
.
2 Press MODE to select 
(video), 
(still image) or 
(voice).
3 Press MENU. The menu screen appears.
4 Select the desired sub menu and menu item with the
●To return to the normal screen, press MENU.
●To display the operation guide, press INFO when the menu screen is displayed. (The operation guide is not displayed depending on the type of the menu.) To remove the operation guide, press INFO again.
●Even if the menu item is displayed, some item cannot be set depending on the selected mode (video/still image/voice, recording/playback). In this case, sub menu cannot be accessed or setting cannot be changed.
EXECUTE: Resets all settings to the factory- preset.
[CANCEL]: Returns to menu screen without executing reset.
DEMO MODEOFF: Disables the function.
[ON]: Activates demonstration mode and shows various features on the display.
Demonstration starts in the following cases:
●When the menu screen is closed after [DEMO MODE] is set to [ON].
●With [DEMO MODE] set to [ON], if there is no
operation for about 3 minutes after the power switch is set to 
.
●Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 3 minutes after that, the demonstration will resume.
NOTES:
●If a recording medium is in the camera, demonstration will not take place even if it set to [ON].
●[DEMO MODE] remains [ON] even if the camera power is turned off.
OPERATIONSOUNDOFF: Turns off operation sound.
BEEP: The beep sounds when the power is turned on or off, and at the beginning and end of recording.
[MELODY]: Instead of a beep, a melody sounds when any operation is performed.