GETTING STARTED EN 17
Date/Time Settings
The recording start date/time is recorded on the video/still image/voice file and it can be checked by pressing INFO during playback.
1 Set the power switch to 
or 
.
2 Press MENU. The menu screen appears.
3 Select [DISPLAY] with the
4 Select [CLOCK ADJUST] with the multi- controller (r/t), then press 49. The month is highlighted.
5 Input the month with the
Repeat to input the day, 
AM year, hour and minute.
6 Press MENU to
return to the normal screen.
If the camera is not used for approx. 3 months, the clock’s lithium battery will become discharged and the date/time stored in memory will be lost. When this occurs, first connect the camera to an AC outlet using the AC adapter for over 24 hours to charge the clock’s rechargeable lithium battery. Then perform the date/time setting before using the camera.
Note that the camera can be used without setting the date/time.
Inserting/Removing a CF Card
You can use a CF card (CompactFlash card) as | |||
a recording medium in the CF slot. | |||
| |||
The removable hard disk (provided) or |
| ||
Microdrive® is a type of CF cards. See page 62 |
| ||
for the guaranteed media to work with this | |||
camera. |
| ||
|
| ||
| Rear |
| |
Front | Terminals |
| |
|
| ||
| OPEN |
| |
CF Slot |
|
| |
| Eject Button |
| |
Battery/CF |
|
| |
Card Cover |
|
| |
1 Make sure the camera’s power is off.
2 Slide and hold OPEN in the direction of the arrow a, then open the battery/CF card cover.
3 When the eject button is pulled out as shown in the illustration, push it once.
●The button is pushed in.
4 To insert a CF card, firmly insert it as shown in the illustration.To remove a CF card, push the eject button twice.●The eject button comes out by pushing it once. By pushing the eject button once again ejects the CF card.
5 Close the battery/CF card cover firmly until it locks.
CONTINUED ON NEXT PAGE