MANAGING FILES EN 41

 

 

 

 

 

 

 

 

 

 

 

 

Cleaning Up a Recording

 

 

 

Copying/Moving Still Image

 

 

 

 

 

 

 

Medium

 

 

/ /

 

 

 

Files

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Writing speed of recording media tends to

 

You can copy or move still image files between

become slow after long period of repeated use.

 

recording media in CF and SD slots using the

To regain the speed, execute cleanup

 

on-screen display.

 

 

periodically. The cleanup function is equivalent

 

Before proceeding to following steps,

to “Defragmentation” of PC’s function.

 

 

● Make sure that recording media are inserted in

NOTE:

 

 

 

 

 

 

 

 

 

both CF and SD slots.

 

 

Make sure to use the provided AC adapter for the

 

● Make sure that enough free space is left in the

power supply when cleaning up a recording

 

 

copy/move destination medium.

medium. ( pg. 15)

 

 

 

 

1 Set the power switch to

or .

1 Set the power switch to

 

 

 

 

or .

 

2 Press MENU. The menu screen appears.

2 Press MENU. The menu screen appears.

 

 

3 Select [MEMORY CARD SETTING] with the

3 Select [MEMORY CARD SETTING] with the

 

 

multi-controller (r/t), then press 49.

multi-controller (r/t), then press 49.

 

4 Select [COPY/MOVE] with the multi-

4 Select [CLEAN UP] with the multi-controller

 

 

controller (r/t), then press 49.

(r/t), then press 49.

 

 

 

 

5 Select [COPY] or [MOVE] with the multi-

5 Select [CF SLOT] or [SD SLOT] with the

 

 

controller (r/t), then press 49.

multi-controller (r/t), then press 49.

 

COPY: Files are copied to the destination

● If the AC adapter is not connected to the camera,

 

 

medium while leaving original files in the source

 

a warning message appears. In this case, connect

 

 

 

medium.

 

 

 

the AC adapter.

 

 

 

 

 

 

 

 

 

 

 

MOVE: Files are moved to the destination

6 Select [EXECUTE] with the multi-controller

 

 

medium while deleting original files (except

(r/t), then press 49.

 

 

 

 

read-only files) in the source medium.

● To cancel cleanup, select [CANCEL], then press

 

6 Select the direction of copy/move with the

49.

 

 

 

 

7 When cleanup is finished, [CLEANING UP

multi-controller (w/e), then move the multi-

controller to t. (SD ] CF or CF ] SD)

COMPLETED] appears. Press 49 to complete

 

the operation.

 

●It may take for a while until cleanup is completed.

CAUTION:

Do not remove the recording medium or perform any other operation (such as turning off the power) during cleanup.

CONTINUED ON NEXT PAGE