24 EN VIDEO RECORDING & PLAYBACK

Connecting to a TV or VCR

Playback on a TV

1 Make sure all units are turned off.

 

Open the cover.

2 Connect the camera to a TV or VCR as

 

shown in the illustration.

 

If using a VCR, go to step 3.

 

If not, go to step 4.

 

3 Connect the VCR output to the TV input,

 

referring to your VCR’s instruction manual.

To AV connector

4 Turn on the camera, the VCR and the TV.

 

5 Set the VCR to its AUX input mode, and set

 

the TV to its VIDEO mode.

S-Video/Audio/Video Cable

(provided)

TV

VCR

A Black to S-VIDEO IN (Connect when your TV/ VCR has S-VIDEO IN and A/V input connectors. In this case, it is not necessary to connect the yellow video cable.)

B Yellow to VIDEO IN (Connect when your TV/ VCR has only A/V input connectors.)

C Red to AUDIO R IN* D White to AUDIO L IN*

*Not required for watching still images only.

NOTES:

6 Start playback on the camera. ( pg. 22)

To choose whether or not the following displays appear on the connected TV

●Date/Time

Set [DATE/TIME] to [AUTO], [ON] or [OFF]. ( pg. 48, 49)

●Counter

Set [SCENE COUNTER] to [ON] or [OFF]. ( pg. 48, 49)

(Pressing INFO button also turns on/off the displays.)

Dubbing to a VCR

1 Perform steps 1 to 6 above.

2 At the point you want to start dubbing, start recording on the VCR. (Refer to the VCR’s instruction manual.)

3 To stop dubbing, stop recording on the VCR, then stop playback on the camera.

●It is recommended to use the AC adapter as the power supply instead of the battery pack. ( pg. 15)

●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camera is turned on.

●To connect the camera to a PC, refer to the software installation and USB connection guide.