If the continuous shooting mode is set to on, keeping the recording start/stop button pressed in step 3 in “Still Image Recording” ( pg. 25) provides an effect similar to serial photography. (Interval between still images: approx. 0.5 seconds)
To use this function, set the recording mode dial to other than 
, then move the 
indicator appears on the display.
●To turn off this function, move the
to e so that 
(or 
) indicator disappears.
●Continuous shooting may not work well depending on the recording medium.
●The continuous shooting speed will drop when repeatedly making continuous shots.
FlashYou can use the flash for still image recording. The flash mode can be changed as required.
[AUTO]: The flash fires automatically when the surroundings are dark.
AUTO
ON: The flash fires regardless of the shooting condition.
SLOW SYNCHRO: The flash fires regardless of the shooting condition. The shutter speed becomes slower in this mode, so the background can be also brightened.
[ ] =
Push the flash down slightly.
NOTES:
●The flash, continuous shooting or bracket shooting etc. cannot be used at the same time. An unusable mode indicator blinks or goes out.
●The flash icon also blinks while charging the flash.
●If the flash is not bright enough, set [GAIN] to [200] or [400]. ( pg. 51)
Deleting Files
If you press 
during recording mode, the file recorded most recently will be deleted.
FLASH OPEN
● However, if the recording mode (video, still image 
or voice) is switched or the power is turned off and on again after recording, you cannot delete the 
file.
1 Set the power switch to 
.
2 Press MODE to select 
.
3 Slide FLASH OPEN in the direction of the arrow a so that the
●The flash icon appears.
4 Select the desired flash mode with the multi- controller w (
).