JVC LYT1994-001B-M Read This First, When Using an SD Card, Precautions on handling batteries

How to use the Touch Sensor

After the menu is displayed on the LCD monitor:

Q		VIDEO
		DUBBING PLAYBACK
		PLAYBACK MPG FILE
		EDIT
	l	ON-SCREEN DISPLAY
	SWITCH DISPLAYED CONTENTS
	SET		QUIT
	R

QSlide your finger up and down on the sensor. R Select [SET]. (Touch OK.)

A

B

ATo select an on-screen button appearing on the left side, touch the portion of the sensor next to the on-screen button.

BTo select an on-screen button appearing at the bottom of the screen, touch the buttons underneath them.

Read these INSTRUCTIONS to enjoy your CAMCORDER.

For more details on the operations, refer to the

GUIDEBOOK in the supplied CD-ROM.

In order to view the GUIDEBOOK, Adobe® Acrobat® ReaderTM or Adobe® Reader® must be installed.

Adobe® Reader® can be loaded from Adobe’s web site: http://www.adobe.com/

NOTE

Select your desired language with a single click. The model name is indicated on the bottom of your camcorder.

Read This First!

Make a backup of important recorded data It is recommended to copy your important recorded data to a DVD or other recording media for storage. JVC will not be responsible for any lost data.

Make a trial recording

Before the actual recording of important data, make a trial recording and play back the recorded data to check that the video and sound have been recorded correctly.

Reset the camcorder if it does not operate correctly

This camera uses a microcomputer. Factors such as background noise and interference can prevent it from operating correctly. Close the LCD monitor and remove the power supply (battery pack or AC adapter) from the camcorder, then reattach it.

Precautions on handling batteries

•Be sure to use the JVC BN-VF808U/ VF815U/VF823U battery packs.

•If the camcorder is subjected to electrostatic discharge, turn off the power before using it again.

If a malfunction occurs, stop using the camcorder immediately and contact www.jvc.com or by phone at 1-800-252-5722

Recorded data may be erased while the camcorder is being repaired or inspected. Back up all data before requesting repairs or inspections.

Because the camcorder may be used for demonstration in a shop, the demonstration mode is set to on by default To deactivate the demonstration mode, set [DEMO MODE] to [OFF].

When Using an SD Card

•Operations are confirmed on the following SD cards.

Class 4 or higher compatible SD or SDHC card Panasonic, TOSHIBA, SanDisk, ATP SD card (256 MB to 2 GB) or SDHC card (4 GB to 32 GB).

•If other media are used, they may fail to record data correctly, or they may lose data that had already been recorded.

•MultiMediaCards are not supported.

GETTING RECORDING/ USINGFURTHER ENGLISH STARTED PLAYBACK WITH TV EDITING COPYING INFORMATION