JVC HM-DH30000U manual Setting clock semiautomatically, Select D.S.T. mode, Select time zone

EN 11

Setting clock semiautomatically

— Semiauto Clock Set

You can change the host channel/D.S.T. /time zone setting manually.

First follow steps 1 to 3 on page 10, then go to the following steps.

6Select D.S.T. mode

You have three choices:

AUTO– Select if you want to adjust your VCR’s clock automatically by the incoming signal from the host channel. (Auto Daylight Saving Time*)

ON– Adjustment will be made by the built-in

4Set Auto Clock to ON

Press %Þ to move the highlight bar to “AUTO CLOCK”, then press @ # so that “ON” is selected.

CLOCK SET UP
	TIME	DATE	YEAR
	1:00PM	12/24	2001 MON
	AUTO CLOCK : ON		(CATV)
	HOST CH	: AUTO
	D.S.T.	: AUTO
	TIME ZONE	: AUTO

PRESS (5°), THEN (23)

PRESS (MENU) TO END

clock itself.

OFF– Select when Daylight Saving Time does not apply to you.

Press %Þ to move the highlight bar to “D.S.T.”, then press @ # repeatedly until the desired setting is selected.

7Select time zone

Then;

To select the host channel — go to step 5. To select the D.S.T. mode — go to step 6. To select the time zone — go to step 7.

NOTE:

The time set previously will be erased when “AUTO CLOCK”, “HOST CH”, “D.S.T.” or “TIME ZONE” setting is changed.

5Select host channel

You can either select “AUTO” or enter a PBS channel number.

Press %Þ to move the highlight bar to “HOST CH”, then press @ # until “AUTO” or the desired PBS channel number is selected.

NOTE:

Some PBS channels do not transmit clock setting data.

* Auto Daylight Saving Time

This function enables automatic adjustment of the VCR’s clock at the start and end of Daylight Saving Time.

With Auto DST activated, . . .

. . .	on the first Sunday of April at 2:00 AM, the clock is
adjusted to 3:00 AM.
. . .	on the last Sunday of October at 2:00 AM, the

clock is adjusted to 1:00 AM.

You can select the time zone automatically or manually.

Press %Þ to move the highlight bar to “TIME ZONE”, press @ # repeatedly until “AUTO” or the desired time zone is selected.

Each time you press the button, the time zone changes as follows:

OAUTO O ATLANTIC O EASTERN

OCENTRAL O MOUNTAIN O PACIFIC

OALASKA O HAWAII O (back to the beginning)

NOTE:

If an incorrect clock time is displayed by the Plug & Play setting, you may be receiving the clock setting data of a PBS channel from an adjacent time zone or from an incorrect PBS channel from a cable TV system. If you selected “AUTO” for the host channel in step 5, be sure to select the correct time zone manually.

8Return to normal screen

Press MENU.

IMPORTANT

Turn off the VCR after performing Semiauto Clock Set. “Auto” will appear on the front display panel while the clock is being set. The current clock time will appear automatically when the clock setting is complete.