JVC HM-DH30000U manual Turn on DBS receiver, Access DBS Receiver Set screen, On Next page

DBS RECEIVER SET UP

OFF

PRESS (2 3), THEN (OK)

PRESS (MENU) TO END

EN 19

Turn on the VCR and the TV, and select the AV mode on the TV.

VCR TV CABLE/DBS

1 2 3

4 5 6

7 8 9

0

Setting DBS receiver output channel & brand

After installation, set the DBS receiver’s output channel and its brand correctly; otherwise, the Controller cannot work correctly.

1 Turn on DBS receiver

Select a channel other than channel 55, 100 or 205 on your DBS receiver.

2Access Main Menu screen on VCR

Press MENU.

3Access Tuner Set Up screen

Press %Þ to move the highlight bar (arrow) to “TUNER SET UP”, then press OK.

4

Access DBS Receiver Set screen

34	5
2	34

Press %Þ to move the highlight bar (arrow) to

“DBS RECEIVER SET UP”, then press OK.

TUNER SET UP

BANDCATV AUTO CHANNEL SET UP MANUAL CHANNEL SET GUIDE CHANNEL SET CABLE BOX SET UP

3DBS RECEIVER SET UP PRESS (5°), THEN (OK)

PRESS (MENU) TO END

5

Select DBS receiver output channel

Your selection depends on how your DBS receiver is connected to your VCR.

● If your DBS receiver is connected to your VCR’s ANTENNA IN terminal on the rear panel

Press @ # until the channel number representing the DBS

receiver’s output (CH3 or CH4) appears on the screen.

●If your DBS receiver is connected to your VCR’s AUDIO/VIDEO IN connectors on the front panel Press @ # until “ON F-1 (FRONT)” appears on the screen.

●If your DBS receiver is connected to your VCR’s AUDIO/VIDEO IN (L-1) or AUDIO/VIDEO IN (L-2) connectors on the rear panel

Press @ # until “ON L-1 (REAR)” or “ON L-2 (REAR)” appears on the screen.

●If you do not use a DBS receiver

Press @ # until “OFF” appears on the screen.

CONTINUED ON NEXT PAGE \