JVC HM-DH30000U manual TV Brand Setting, 66 EN

66 EN MULTI-BRAND REMOTE CONTROL

TV Brand

Setting

This Remote can control some functions of remote controllable TVs listed below. Without setting, you can control a JVC TV.

1 Turn on the TV

Turn on the TV using the Power button on the TV or its Remote.

2

VCR TV CABLE/DBS

TV/VCR

1

4

3–13

POWER

ENTER

2 3

56 3–2

89 Number

0

2 Set remote operation mode

Set the VCR/TV/CABLE/DBS selector to “TV”.

3Set TV brand code

Follow the example shown below.

1Press and hold POWER.

2Press the Number keys to enter your TV’s brand code by referring to the table below.

3Press STOP ( 7 ), and release POWER.

3–3

TV VOL +/–

TV CH +/–

TV BRAND NAME	BRAND CODE
JVC	01, 03
HITACHI	10
MAGNAVOX	02
MITSUBISHI	03
PANASONIC	04, 11
RCA	05
SHARP	06
SONY	07
SAMSUNG	12
SANYO	13
SEARS	13
TOSHIBA	08
ZENITH	09

●Once you have set the Remote to operate the TV, you do not have to set it until you replace the batteries from the Remote.

●JVC and PANASONIC have two codes. If the TV does not function with one code, try entering the other.

4Operate TV

First set the VCR/TV/CABLE/DBS selector to “TV”, then press one of the following buttons:

POWER, TV/VCR, TV CH +/–, (TV

Muting), TV VOL +/–, and Number keys.

●For some brands, you must press ENTER after having pressed the Number keys to enter a channel number.

●To operate the VCR, set the VCR/TV/CABLE/ DBS selector back to “VCR”.

NOTES:

●Depending on the type of TV, some or all functions cannot be operated using this Remote.

●It’s not possible to operate a TV not equipped with a remote sensor.

(Ex.) To set Remote to RCA 05:

POWER	AUX	5
	0		STOP
		JKL
Hold		Press in succession	Release
down