JVC HM-DH30000U manual Basic, VHS Recording

26 ENBASIC PLAYBACK AND RECORDING (cont.)

Basic				This VCR can check the tape condition during recording
				(and playback), and realizes the best possible pictures.
Recording
					locate the programs you have recorded on a tape.
					In addition, this VCR is equipped with the Video
					Navigation function, which allows you to quickly
					When recording on this VCR, the tapes are
Turn on the VCR and the TV, and select the AV					automatically numbered so that every tape recorded
mode on the TV.					on this VCR has a different tape number. With this
					function, the program information such as recording
		STOP/EJECT			date, start time, channel number, and recording
	3				speed are also automatically stored in the VCR’s
POWER		(	7/0 )		memory.
					● For the Video Navigation function, see page 42.
					To memorize the recording date and start time for
					the Video Navigation function, the date and clock
					must be set correctly.

		D-VHS Recording
2 1 D-VHS	4	Load a D-VHS cassette
		1 Make sure the record safety tab is intact. If not,
		cover the hole with adhesive tape before
		inserting the cassette.

VCR TV CABLE/DBS

● The D-VHS indicator lights on the front display

panel and the D-VHS recording mode is

1

4

7

REW ( 1 )

4

		POWER
2	3	2–b
5	6
8	9
0
		2–a
		3
		FF ( Á )
		PAUSE ( 8 )
		STOP ( 7 )

selected automatically.

2 Select recording channel

On the front panel:

Press CH + or –.

On the Remote:

a– Press CH + or –. or

b– Press the Number keys.

Set tape speed
3 Press HS/STD/LS3/SP/EP (	) to set the
recording speed.

● The recording speed changes each time
HS/STD/LS3/SP/EP (	) is pressed.
HS: When picture quality and sound quality is
important.
Or when recording digital HDTV.
STD: When picture quality and recording time

NOTES:

●You can select HS/STD/LS3 mode in step 3 also when recording from another D-VHS digital recorder or a camcorder equipped with DV connector.

●When recording from the devices other than the D-VHS digital recorder or the camcorder connected using the i.LINK connector, the recording speed will be selected automatically. The recording will be made in either HS or STD mode according to the amount of data input (the transfer rate) from the i.LINK connector. When you want to record in another mode, record from analog input (using a connector other than the i.LINK connector).

are important.

LS3: To record for three times longer than in

STD mode, with picture quality that is

equal to or better than S-VHS.

4Start recording

On the front panel:

Press REC ( ¦ ).

On the Remote:

While holding REC ( ¦ ), press PLAY ( 3 ).