JVC HM-DH30000U manual 30 EN, Other useful functions for recording, Accidental erasure prevention

30 EN BASIC PLAYBACK AND RECORDING (cont.)

Other useful functions for recording

You can also use the following functions for recording.

●Recording Resume Function

If there is a power outage during recording (including Instant Timer Recording, timer recording and Satellite Auto Recording), the recording will resume automatically when the power is restored to the VCR. (No setting is required for this function.)

●Video Calibration (S-VHS/VHS only) (☞ pg. 53) When this function is set to “ON”, this VCR checks the condition of the tape in use during playback and recording, and compensates to provide the highest- possible pictures.

●Second Audio Recording (☞ pg. 54)

This VCR’s built-in MTS decoder enables reception of Multichannel TV Sound broadcast.

To record a SAP program received, set “2ND AUDIO REC” to “ON” using the menu screen.

NOTES:

When the channel is changed on the VCR;

●The “STEREO” indication appears on the screen for about 5 seconds if the program is a stereo broadcast.

●The “SAP” indication appears on the screen for about 5 seconds if the program is a SAP broadcast.

●Both indications appear when a stereo program is accompanied by SAP sound.

●S-VHS Recording Mode (☞ pg. 57)

This VCR allows you to record on a D-VHS and S-VHS tape with VHS picture quality.

Accidental erasure prevention

To prevent accidental recording on a recorded cassette, remove its record safety tab.

To record on it later, cover the hole with adhesive tape.

Record safety tab