24 EN | INITIAL SETTING (cont.) |
| BRAND | CODE |
Press [FG] to move the arrow to “BRAND”.
Press [D E] to enter the brand code from the list shown to the right.
FUNCTION SET UP | TUNER SET UP | INITIAL SET UP | |
CABLE SET UP |
|
| |
INPUT CH |
| OFF | |
BRAND |
| 1 | |
TEST MODE |
|
| |
MENU | OK | SELECT WITH ARROW KEYS | |
EXIT | SELECT | THEN PRESS [OK] | |
|
| ||
ARCHER | 1, 5, 17 |
CABLETENNA | 1, 17 |
CABLEVIEW | 15, 16, 17, 21, 25 |
CITIZEN | 15, 16, 17, 21, 25 |
CURTIS | 2, 8 |
DIAMOND | 1, 17 |
GC BRAND | 15, 16, 17, 21, 25 |
GEMINI | 15 |
GENERAL INSTRUMENTS | 1, 4, 6, 11, 12, 15, 28 |
HAMLIN | 10, 18, 23 |
Press [FG] to move the arrow to “TEST MODE”, then press [OK].
NOTE:
If you do not engage the test mode in step F, “INPUT CH” and “BRAND” are not set.
| •If the cable box’s | FUNCTION SET UP TUNER SET UP INITIAL SET UP | ||
| channel changes to | CABLE SET UP |
| |
| 9, setting is |
| INPUT CH | OFF |
| complete |
| BRAND | 1 |
| TEST MODE CHANNEL 09? | ||
|
| DID YOUR CABLE BOX CHANGE TO | |
Press [D E] to |
| YES | NO |
move the arrow to |
| OK |
|
“YES”, then press | MENU | SELECT WITH ARROW KEYS | |
EXIT | SELECT | THEN PRESS [OK] | |
[OK] and “CABLE BOX CONTROL IS ON” appears on the screen for about 5 seconds.
•If the cable box’s channel does not change to 9A Press [D E] to move the arrow to “NO”. B Press [OK].
C Repeat step E until the cable box’s channel changes to 9 by entering another code.
D If the channel does not change after going through all the code numbers listed for your model of cable box, then try all the other numbers.
G Return to normal screen
Press [MENU].
If the VCR’s clock has not been set (with “AUTO CLOCK” set to “ON”)“CABLE BOX USERS SET CLOCK MANUALLY” appears for about 5 seconds when you press [OK] in step C, then the Clock Set screen appears.
Perform Manual Clock Set on page 17. If you press [MENU] after the clock has been set, the Cable Box Input Channel screen in step D appears.
JASCO | 15 |
JERROLD | 1, 4, 6, 11, 12, 15, 28 |
NOVAVISION | 2, 8 |
OAK | 7, 20 |
PANASONIC | 13, 14 |
PULSER | 15, 16, 17, 21, 25 |
RCA | 13, 14 |
REGAL | 10, 18, 23 |
REMBRANDT | T1, 16, 17 |
SAMSUNG | 5, 16, 24 |
SCIENTIFIC ATLANTA | 2, 8 |
SIGMA | 7, 20 |
SL MARX | 5, 16, 17, 24, 25 |
SPRUCER | 13, 14 |
STARGATE | 5, 15, 16, 17, 21, 24, 25 |
TELEVIEW | 5, 16, 24 |
TOCOM | 1, 4, 16 |
UNIKA | 1, 17 |
UNIVERSAL | 16, 17, 25 |
VIDEOWAY | 3, 9, 22 |
ZENITH | 3, 9, 22 |
NOTES:
•The Controller may not work with all types of cable box.
•If your cable box does not respond to any code, you cannot use the Controller to change cable box channels. In this case, make sure to leave the cable box turned on and tuned to the proper channel before the scheduled start time of timer recording.
Contact your cable company about the possibility of exchanging your current cable box with the one compatible with your VCR.
•The VCR can only change the cable box channel through the Controller during timer recording.
•If your cable box cannot be operated with a Remote (because it has no remote sensor), you cannot use the Controller to change its channels. Make sure to leave the cable box turned on and tuned to the proper channel before the scheduled start time of timer recording.
•If the VCR’s memory backup expires because of a power failure, set the cable box input channel and brand again.
•For customers in U.S.A.: If you are unable to set the Controller, contact JVC toll free at