EN 49

Digital Timer Programming

This VCR allows you to set recording timer or viewing timer of a digital program. You can also make use of the Electronic Program Guide (EPG) on page 51 to set easy record or easy view timer.

Recording timer

A Load a cassette

Make sure the record safety tab is intact.

B Access Digital Set Up screen

Press [DTV MENU].

C Access Digital Program screen

•Turn on the VCR and the TV, and select the AV mode on the TV.

•Set the [VCR/TV/CABLE/DBS] selector on the Remote to [VCR].

APress [D E] to move the arrow to “DIGI-

TAL PROGRAM”, then press [G] or [OK].

BPress [OK] at “DIGI- TAL PROGRAM” to access the timer screen.

DIGITAL SET UP

 

 

 

DIGITAL PROGRAM

TUNER

CLOSED CAPTION PARENTAL

 

DIGITAL PROGRAM

 

MENU

OK

 

SELECT WITH ARROW KEYS

EXIT

SELECT

THEN PRESS [OK]

 

 

VCR CABLE

TV /DBS

[DTV MENU][MENU] [JKHI][OK]

ATTENTION:

When performing timer programming of a digital (ATSC) program, the VCR must be set to the standby mode condition 10 minutes before the start time of a program.

As timer recording is performed based on the time information of each program, timer standby and timer recording may not be possible due to deviation in the timer information of each program if the VCR is set to standby mode within 10 minutes of the program start time. In such cases, press [REC] to perform manual recording.

•The clock must be set to access the timer screen. If you have not set the clock, an error message will be displayed. Refer to page 15 for the clock setting procedure.

•When the received channel is not a digital (DTV) channel, “CAN NOT SET ON THIS CHANNEL SELECT DTV CHANNEL THEN RETRY” appears on the screen.

•When receiving digital broadcast, if the “DIGITAL PROGRAM” is set to access the timer screen at the same instant a blocked program or scene is received, the timer screen will not be displayed. In addition, if a blocked program or scene is received while the timer screen is being displayed, the timer screen will disappear from the screen.

D Access Timer Mode screen

Press [D E] to move the arrow to “Timer”, then press [G] to move the arrow to “Timer mode”.

E Set record timer

A Press [D E] to

 

 

 

 

 

 

Timer

Timer List

 

Controller

select “Rec”,

TIMER

Timer mode

 

Rec

 

 

 

 

 

Program 2

Channel

 

DTV 8-1

 

then press [G]

 

Start Time

 

2:30 PM

 

 

 

Date

 

May 1 (Wed)

 

or [OK].

 

End Time

 

3:30 PM

 

 

 

Weekly/Daily

 

Once

 

 

 

Stop Mode

 

Manual

 

 

 

 

 

 

Set Timer

 

 

Select

OK Operate

BACK Back DTV MENU Exit

BPress [FG] to select the individual items “Chan- nel”, “Date”, “Start Time”, “End Time”, “Weekly/ Daily” and “Stop mode”, and [D E] to enter the desired setting (channel, date, start time etc.).

•The “Weekly/Daily” item allows you to choose from a selection of “Once”, “Weekly”, “Mon-Fri” or “Daily”.

•You can select between “Manual” and “Event” for the “Stop Mode” item.

CPress [FG] to move the arrow to “Set Timer” upon completing the necessary settings, then press [OK].

•An mark appears in front of the program title.