EN 77

JLIP ID Number Setting

•Turn on the VCR and the TV, and select the AV mode on the TV.

•Set the [VCR/TV/CABLE/DBS] selector on the Remote to [VCR].

VCR CABLE

TV /DBS

The JLIP (Joint Level Interface Protocol) terminal is used to connect the VCR to a personal computer or similar device. By connecting through the JLIP terminals, you can control the VCR during editing and certain other operations, from the connected personal computer or similar device.

When connecting this VCR to another device using the JLIP terminals, each device must have a different JLIP ID number.

The JLIP ID number of this VCR is preset to “1” when shipped from the factory. You can change this number to any other number between 1 to 99.

To change the JLIP ID number of this VCR, follow the procedure below.

A Access Main Menu screen

Press [MENU].

B Select JLIP ID Set Up screen

APress [D E] to move the arrow to “INITIAL SET UP”, then press [G] or [OK].

BPress [D E] to move the arrow to “OTHER”, then press [G] or [OK].

C Set JLIP ID Number

AD

B C

Press [FG] to move the arrow to “JLIP ID”.

Press [D E] to enter the desired ID number.

FUNCTION SET UP

TUNER SET UP INITIAL SET UP

DIGITAL SET UP

CLOCK SET

 

GUIDE CHANNEL

OTHER

JLIP ID

1

 

LINC

AUTO

 

RESET NUMBER

 

MENU

OK

SELECT WITH ARROW KEYS

EXIT

SELECT

THEN PRESS [OK]

 

 

 

D Return to normal screen

Press [MENU].

NOTE:

For further details on the JLIP system or devices, consult your nearest JVC dealer.

U.S. customer can contact JVC directly toll free at 1-800-252- 5722.