JVC HR-DD445EK Basic Connections, Check Contents, Situate Recorder, Connect Recorder to Mains

4INSTALLINGYOURNEWRECORDER

Basic Connections

Back of TV

Aerial connector

21-pin AV input connector (SCART)

It's essential that your video recorder be properly connected. Follow these steps carefully. THESE STEPS MUST BE COM-

PLETED BEFORE ANY VIDEO OPERATION CAN BE PER- FORMED.

1	CHECK CONTENTS
	Make sure the package contains all of the accessories
	listed in “Specifications” (☞ pg. 47).
2	SITUATE RECORDER
	Place the recorder on a stable, flat surface.
	CONNECT RECORDER TO
3	TV
	The connection method you use depends on the type of
	TV you have.
	RF CONNECTION
	● To Connect To A TV With NO 21-pin AV input
	connector (SCART) . . .
	a– Disconnect the TV aerial cable from the TV.
	b– Connect the TV aerial cable to the ANT. IN jack
	on the rear panel of the recorder.
	c– Connect the provided RF cable between the RF
	OUT jack on the rear panel of the recorder and the
	TV’s aerial connector.
	Before operating the recorder, make sure the TV’s
	channel is set to the VIDEO channel (☞ pg. 6).	4
	AV CONNECTION
	● To Connect To A TV with 21-pin AV input connector
	(SCART) . . .
	a– Connect the aerial, recorder and TV as per “RF
	CONNECTION”.
	b– Connect an optional SCART cable between the
	AV1 IN/OUT socket on the rear panel of the
	recorder and the TV’s 21-pin AV input connector
	(SCART).
	Before operating the recorder, make sure the TV is set to
	the VIDEO (or AV) mode.

RF Cable (provided)

21-pin SCART Cable (not provided)

Mains Power

Cord

Mains outlet

CONNECT RECORDER TO MAINS

Plug the end of the mains power cord into a mains outlet.