10
BASICOPERATIONS (cont.)
Recording
Turn on the TV and select the VIDEO channel (or AV mode).
TV signals being received by the recorder’s
1 | LOAD A CASSETTE |
Insert a cassette with the record safety tab intact (See | |
below). | |
| |
● The counter is reset to 0:00:00 and the recorder | |
| power comes on automatically. |
1
PAUSE
5 | RECORD |
|
4
5 | PLAY |
|
TV PROG | 2 |
|
STOP/EJECT
6
2 |
| CHOOSE A PROGRAMME |
| Press TV PROG +/– or the NUMBER keys to select the | |
preset you wish to record. | ||
|
| |
| ● The TV PROG dial can also be used to select a preset. |
| SET TAPE SPEED |
| Press SP/LP ( ). Check the SP/LP indicator on the |
| recorder display panel to confirm the selected tape |
3 speed. | |
| ● Picture quality of LP recordings will not be as high as |
| on SP recordings. |
|
|
4 | START RECORDING |
Press and hold RECORD and press PLAY on the remote | |
control, or press RECORD on the recorder. | |
| |
B.E.S.T. takes place at the beginning of both the |
–
2 | 1 | 2 | 3 | |
4 | 5 | 6 | ||
NUMBER | ||||
|
|
| ||
| 7 | 8 | 9 | |
|
| 0 |
|
2
4
TV PROG 2
SP/LP 3
| first SP and the first LP recording after inserting the |
| cassette (☞ pg. 22). |
|
|
|
|
| ● You can not change the preset whilst recording is in |
| progress. To change the preset, see step 5. |
|
|
| PAUSE/RESUME |
5 | RECORDING |
Press PAUSE. Press PLAY to resume recording. | |
| |
● During the Record Pause mode, you can change the | |
preset by pressing the TV PROG +/– buttons or the |
|
| 1 |
|
| PLAY 4,5 |
4 RECORD |
| PAUSE 5 |
| 3 | |
| 6 | STOP |
|
|
Recording Resume Function
If there is a power outage during recording (or Instant Timer Recording or timer recording), the recording will resume automatically when power is restored to the recorder unless the recorder's memory backup has expired.
NUMBER keys or by turning the TV PROG dial. |
STOP RECORDING |
Press STOP on the remote control or STOP/EJECT on |
the recorder. Then press STOP/EJECT to remove the |
6 cassette. |
Accidental erasure prevention
●To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape.
Record safety tab