PLAY | SCAN SHUTTLE |
| TIME |
PAUSE
JOG
7 8 9
0 | 4 |
TV PROG
LAY 1
FF
REW
PAUSE
3
High-Speed (Turbo) Search
ACTIVATE HIGH-SPEED SEARCH
1 During playback or still picture, press FF for forward
To resume normal playback, press PLAY.
NOTE:
For short searches, press and hold FF or REW for more than 2 seconds during playback or still picture. When released, normal playback resumes.
ATTENTION
●In the
●the picture will be distorted.
●noise bars will appear.
●there will be a loss of colour with a tape recorded in LP mode.
●Picture may not appear during
tape recorded in LP mode.
9
Still
PAUSE DURING PLAYBACK
1 Press PAUSE. If there is vertical jitter, use the TV PROG buttons to correct the picture.
●During still picture, the sound from the previous
3 seconds (approx.) will be played back repeatedly (provided there was at least 6 seconds of normal playback prior to engaging the still picture mode).
●The "TIME SCAN AUDIO" must be set to "ON", or the sound will not be heard (☞ pg. 21).
ACTIVATE FRAME-BY-FRAME
PLAYBACK
2 Turn the JOG dial to the right for forward
OR
Press PAUSE. Each time PAUSE is pressed the tape will advance one frame.
OR
Press Þor %. Each time one of these buttons is pressed the tape will move one frame in the direction of the arrow.
To resume normal playback, press PLAY.
Slow Motion
ACTIVATE SLOW-MOTION
PLAYBACK
1 Turn the TIME SCAN SHUTTLE ring to the left or press Þduring playback to decrease speed in the forward direction. To play in reverse
OR
During still picture, turn the TIME SCAN SHUTTLE ring to the right for forward slow motion, or to the left for reverse slow motion.
OR
During still picture, press and hold PAUSE for 2 seconds, then release. Press and release again to return to still picture.
OR
During still picture, press and hold Þor %. Release to return to still picture.
To resume normal playback, press PLAY.
