JVC HR-DD855EK Access Main Menu, Adjust Audio, Return to Normal Screen, Activate Spatializer

Hi-Fi Audio Recording LEVEL Control

In most cases, setting the Hi-Fi audio recording level control to the centre position will provide satisfactory results. If necessary, you can adjust the Hi-Fi audio recording level more precisely by reffering to the audio level indicator on the front panel.

	ACCESS MAIN MENU
	SCREEN
1 Press MENU.
	ACCESS HI-FI REC LEVEL
2	CONTROL SCREEN
	Press %Þto move the highlight bar (pointer) to “REC
	LEVEL CTL”, then press OK or %.
	SELECT MODE
	Move the highlight bar	HI-FI REC LEVEL CONTROL
	(pointer) to “MANUAL” by
			MANUAL
3 pressing%%Þ, then press
	OK or .		PRESET
		MIN	+	MAX
		[5°] =
		[MENU] : EXIT
	ADJUST AUDIO
	RECORDING LEVEL
4 Press % or Þ.

●Press %or Þ briefly 5 times to move the on-screen's audio levels by one division on the scale. To move the audio levels faster, keep %or Þ pressed.

●Adjust the recording level while watching the recorder's audio level meters. Set the level so that maximum volume causes the meters to vary between 0dB to 4dB.

RETURN TO NORMAL

SCREEN

5 Press MENU.

NOTE:

25

Spatializer®

This feature expands the sound field when you play back any stereo source or view a stereo programme while recording it. *Spatializer® has no effect on recording quality.

1		ACTIVATE SPATIALIZER®
		Press SPATIALIZER; the current setting will be displayed
		on the screen for about 5 seconds. Pressing
		SPATIALIZER while the screen shows the display
		changes the setting.
		● To view a stereo programme such as movies or
		music, select "SPATIALIZER		" to create more
		spacious sound.
		● To view a monaural programme, select
		"SPATIALIZER[ST" which simulates a stereo effect.
		● Select "SPATIALIZER OFF" to turn off Spatializer® if
		the sound becomes unnatural with either
		"SPATIALIZER	" or "SPATIALIZER[ST" selected.
	● If your TV is equipped with 3D-PHONIC and if you
		use both Spatializer® and 3D-PHONIC at the same
		time, the sound may become unnatural; set either
		function to "OFF".
		● The setting will remain effective even though you
		turn on/off the recorder.

NOTES:

●Spatializer®is effective only with a stereo TV.

●You can change the Spatializer® setting even though "O.S.D." is set to "OFF".

●The setting cannot be changed during search, still, frame-by- frame playback or slow motion mode.

●When this recorder is used as the player for editing, the recorded audio will correspond to the Spatializer® setting.

Noise will increase if the recording level is too low, while distortion will increase if the level is too high.