JVC HR-DD855EK setup guide Remote Con- trol Functions, SET TV Brand Code, Operate TV

28ADVANCEDOPERATIONS (cont.)

Remote Con- trol Functions

SAT

TV Multi-brand Remote Control

Your remote control can operate the basic functions of your TV set. In addition to JVC TVs, other manufacturer’s TVs can also be controlled.

Before you start . . .

●Turn on the TV using its remote control.

SET TV BRAND CODE

V

VCR

TV/VCR

– –:– –

1 Refer to the chart below. While holding down TV on the recorder's remote control, enter your TV’s brand code using the NUMBER keys, then press STOP.

Check if the TV's power goes off as it should. If it does, try other operations (☞ step 2)

1	2	3
			2
4	5	6	NUMBER
7	8	9
	0		4

1

STOP

3 OK

●Once you have set the remote control to operate the TV, you don't have to repeat this step until you replace your remote control's battteries.

●JVC or SAMSUNG has more than one code. If the TV does not function with one code, try entering another.

2	OPERATE TV
	First, press TV to set the remote control to TV mode, then
	press the corresponding button:	, TV PROG +/–,
	TV/VCR, TV +/– (Volume),	(Muting), NUMBER
	keys.

●For some brands of TV, you must press OK after having pressed the NUMBER keys.

IMPORTANT

TV PROG+/–

ATTENTION

TV+/–

Although the provided remote control unit is compatible with JVC televisions, as well as many other models, it may not work with your TV, or in some instances, may have limited function capability.

TV BRAND NAME	CODE
JVC	01, 02, 03, 04
BRANDT	05

The remote control can operate not only the video recorder but also some of your TV and satellite receiver's functions.

●To operate your video recorder, first press the VCR button to set the remote control to the Video mode.

●To operate your TV, first press the TV button to set the remote control to the TV mode.

●To operate your satellite receiver, first press the SAT button to set the remote control to the Satellite Receiver mode.

Control Your TV Using Additional Buttons

Use the NUMBER keys, and the button, button or ä button to select the TV’s channel.

●With televisions under Code 01, 02, 03, 04, 05, 06, 07,

09, 10, 13, 14, 22, 23 or 25, the button corresponds to the 1-digit/2-digit entry switching button (often labelled

– /– –) of your TV’s remote control.

● With televisions under Code 01, 11 or 12, the button corresponds to the 10 + button, and the äbutton corre- sponds to the 20 + button of your TV’s remote control.

NOTE:

The way these buttons are used is determined by your TV. Use these buttons as instructed for your TV’s remote control.

NORDMENDE	05
SABA	05
TELEAVIA	05
TELEFUNKEN	05
THOMSON	05
FERGUSON	06
PHILIPS	07
SAMSUNG	07, 19, 23, 24, 25
BLAUPUNKT	08
GRUNDIG	08
SONY	09
PANASONIC	10
GRAETZ	11
ITT	11
LUXOR	11
SALORA	11
SELECO	11
MIVAR	12
HITACHI	13
TOSHIBA	14
MITSUBISHI	15
FINLUX	16
NOKIA	17
SHARP	18
FUNAI	20
GOLDSTAR	21
NEC	22